Double acting pneumatic actuator, 0–180°, aluminium, 105 Nm at 6 bar

Double acting, 0–180°, 105 Nm at 6 bar, ISO 5211 F05-F07 drilling. ATEX for zones 1/2/21/22.

ATEX

UKEX

DNV

Request a quote Call an engineer Documents and guides

Description

Technical Specifications

Applications

Download

Datasheets

Double acting pneumatic actuator with 0–180° rotation, designed for three-way valves and any application needing a half-turn stroke. It delivers 105 Nm at 6 bar.

The body is hard-anodised extruded aluminium, and travel can be set both with the internal cam and with the screws on the end caps, so the valve stops exactly in the required positions.

Features

Double acting (DA) operation
ISO 5211 drilling F05-F07, 17 mm drive square
NAMUR top shaft and solenoid valve interface
Maximum pressure 8 bar, standard temperature −20…+85 °C
Lubricated for life, 100% functional and leak tested

Use in hazardous areas

Non-electrical actuator compliant with ATEX Directive 2014/34/EU, marked II 2G Ex h IIC T6…T3 Gb and II 2D Ex h IIIC T85°C…T200°C Db: suitable for zones 1, 2, 21 and 22. It also holds DNV marine type approval.

Zone 1

Explosive gas atmosphere likely to occur in normal operation

Zone 2

Explosive gas atmosphere unlikely to occur and, if it does, only for a short period

Zone 21

Explosive dust atmosphere likely to occur in normal operation

Zone 22

Explosive dust atmosphere unlikely to occur and, if it does, only for a short period

# General Type: rack and pinion pneumatic actuator Operation: double acting (DA) Rotation: 0–180°, travel adjustable by cam and end-cap screws Body: extruded aluminium UNI 6060, hard anodised 45–50 µm End caps: die-cast aluminium, polyester powder coated Pinion: nickel-plated steel, anti-blowout design Seals: NBR (FKM for high temperature, silicone for low temperature) # Operating data Supply: compressed air Maximum pressure: 8 bar Standard working temperature: −20…+85 °C # Torque Double acting torque at 6 bar: 105 Nm Double acting torque at 4 bar 68.5 Nm, 5 bar 87 Nm, 7 bar 123 Nm, 8 bar 141 Nm # Interfaces ISO 5211 drilling: F05-F07 Drive square: 17 mm Top shaft and solenoid valve interface: NAMUR Air connections: G 1/8 # Performance Operating time at 6 bar (no valve): 0.42 s anticlockwise / 0.39 s clockwise Air volume per stroke: 0.9 l anticlockwise / 0.83 l clockwise Weight, double acting: 5.98 kg # Certifications ATEX gas: II 2G Ex h IIC T6…T3 Gb ATEX dust: II 2D Ex h IIIC T85°C…T200°C Db Other: CE, UKEX, DNV marine type approval

No items found.