Intrinsic safety

pepperl-fuchs-k-system-barriere-ingressi-analogici

# General Product type: Intrinsically safe isolated barrier for analogue inputs Brand: Pepperl+Fuchs Series: K-System Functions: transmitter power supply (including SMART), current, voltage and resistance repeater, HART loop converter Channels: 1 or 2 Outputs: 1 output or 2 outputs (splitter) SMART protocols: HART, BRAIN, Foxboro (KFD2-STC5) # Certifications Type of protection: intrinsic safety, associated apparatus Field circuits: Zone 0, 1, 2 (Div. 1, 2) Functional safety: up to SIL 3 (IEC/EN 61508) Electromagnetic compatibility: Directive 2014/30/EU, EN 61326-1, NAMUR NE 21 # Electrical Supply: 24 V DC (Power Rail), 20–90 V DC / 48–253 V AC or loop powered Input signal: 4–20 mA; 0–12 V or -10 to 10 V (voltage repeaters) Output: 4–20 mA sink or source (transmitter power supplies) Accuracy: 0.1 % (KFD0-CS) Cut-off frequency: 1.2 kHz (KFD2-VR voltage repeaters) Galvanic isolation: input/output to IEC/EN 60079-11 (KFD0-CS) # Mechanical Width: 12.5 mm or 20 mm Terminals: screw, removable screw or push-in spring Degree of protection: IP20 Ambient temperature: -20 to 60 °C (KFD2-VR)

Channels: 1 or 2 Signal: 4–20 mA, voltage, resistance Supply: Power Rail, AC/DC or loop SIL: up to SIL 3 Width: 12.5 mm or 20 mm

pepperl-fuchs-k-system-barriere-uscite-analogiche

# General Product type: Intrinsically safe isolated barrier for analogue outputs Brand: Pepperl+Fuchs Series: K-System Functions: SMART current driver, SMART current driver/repeater, current/voltage converter Channels: 1 or 2 Field loads: I/P converters, electrical valves, positioners # Certifications Type of protection: intrinsic safety, associated apparatus Field circuits: Zone 0, 1, 2 (Div. 1, 2); KFD0-SCS-Ex1.55: Zone 1, 2 Functional safety: up to SIL 3 (IEC/EN 61508) Electromagnetic compatibility: Directive 2014/30/EU # Electrical Supply: 24 V DC (Power Rail) or loop powered Rated voltage: 19–30 V DC (KFD2-SCD2); 12–35 V DC loop powered (KFD0-CC) Input signal: 4–20 mA from the control system; 0–20 mA or 0–10 V from the field (KFD0-CC) Output: 4–20 mA, load up to 650 Ω (KFD2-SCD2) Voltage drop: 5 V (KFD0-SCS-Ex1.55) Accuracy: 0.1 % Diagnostics: line fault detection (LFD) # Mechanical Width: 12.5 mm or 20 mm Terminals: screw, removable screw or push-in spring Settings: DIP switches and potentiometers (KFD0-CC)

Channels: 1 or 2 Output: 4–20 mA, up to 650 Ω Protocol: HART SIL: up to SIL 3 Supply: Power Rail or loop

pepperl-fuchs-k-system-barriere-convertitori-temperatura

# General Product type: Intrinsically safe isolated barrier with signal converter Brand: Pepperl+Fuchs Series: K-System Functions: RTD, thermocouple, universal, potentiometer, trip value and strain gauge converters Channels: 1 or 2 Configuration: DIP switches and potentiometers, keypad or PACTware # Certifications Type of protection: intrinsic safety, associated apparatus Field circuits: Zone 0, 1, 2 (Div. 1, 2) Functional safety: up to SIL 2 (IEC/EN 61508 / IEC/EN 61511) # Electrical Supply: 24 V DC (Power Rail), 20–90 V DC / 48–253 V AC or loop powered RTD input: Pt10 to Pt1000, Pt GOST, Cu10/50/100, Ni100; 2- or 3-wire Pt100 (KFD0-TR) Thermocouple input: types E, J, K, N, R, S, T Other inputs: potentiometer, voltage, full or half bridge strain gauges Output: 0/4–20 mA; 0 to ±20 mA or 0 to ±10 V (KFD2-WAC2) Additional outputs: 2 relays and RS-485 interface (KFD2-WAC2) Accuracy: 0.1 % of full scale (KFD0-TR, KFD0-TT) # Mechanical Width: 12.5 mm or 20 mm Terminals: screw or removable screw Cold junction compensation: internal or via KC-CJC-** terminal block (KCD2-UT2)

Inputs: RTD, TC, potentiometer, bridge Output: 0/4–20 mA Channels: 1 or 2 SIL: up to SIL 2 Configuration: DIP, keypad, PACTware

pepperl-fuchs-k-system-barriere-ingressi-digitali

# General Product type: Intrinsically safe isolated barrier for digital inputs Brand: Pepperl+Fuchs Series: K-System Functions: switch amplifier, standstill and rotational direction monitor Channels: 1, 2 or 4 Inputs: NAMUR sensors (EN 60947-5-6), SN/S1N sensors, dry contacts # Certifications Type of protection: intrinsic safety, associated apparatus Field circuits: Zone 0, 1, 2 (Div. 1, 2) Functional safety: up to SIL 3 (IEC/EN 61508); PL d (EN/ISO 13849) for KFD2-SH-Ex1 # Electrical Supply: 24 V DC (Power Rail), 20–90 V DC / 48–253 V AC, 115/230 V AC (KHA6) Outputs: relay, active transistor or passive transistor Fault output: fault indication output or collective error message via Power Rail Diagnostics: line fault detection (LFD), LEDs to NAMUR NE 44 # Mechanical Width: 12.5 mm or 20 mm Terminals: screw, removable screw or push-in spring Settings: DIP switches

Inputs: NAMUR, dry contacts Outputs: relay or transistor Channels: 1, 2 or 4 SIL: up to SIL 3 Diagnostics: LFD, NAMUR NE 44

pepperl-fuchs-k-system-barriere-pilota-elettrovalvole

# General Product type: Intrinsically safe isolated barrier for digital outputs (solenoid driver) Brand: Pepperl+Fuchs Series: K-System Field loads: solenoid valves, LEDs, audible alarms Channels: 1 or 2 # Certifications Type of protection: intrinsic safety, associated apparatus Field circuits: Zone 0, 1, 2 (Div. 1, 2) Functional safety: up to SIL 3 (IEC/EN 61508) Electromagnetic compatibility: Directive 2014/30/EU, EN 61326-1, NAMUR NE 21 # Electrical Supply: 24 V DC (Power Rail), bus or loop powered Rated voltage: 20–35 V DC (KFD0-SD2); 20–30 V DC (KFD2-VM) Available outputs: 10 V / 45, 65 or 100 mA; 11 V / 80 mA; 11.7 V / 45 mA; 12 V / 45 mA; 13 V / 100 mA; 15.3 V / 17 mA Control input: 24 V DC signal; 3 AND/OR logic inputs (KFD2-VM) # Mechanical Width: 12.5 mm or 20 mm Terminals: screw or removable screw

Output: up to 13 V / 100 mA Channels: 1 or 2 Supply: Power Rail, bus or loop SIL: up to SIL 3 Width: 12.5 mm or 20 mm

pepperl-fuchs-k-system-barriere-frequenza-velocita-livello

# General Product type: Intrinsically safe isolated barrier for frequency and level signals Brand: Pepperl+Fuchs Series: K-System Functions: frequency converter with trip values, with direction and synchronisation monitor, rotation speed monitor, conductive switch amplifier Channels: 1 or 2 Configuration: front keypad, PACTware or DIP switches # Certifications Type of protection: intrinsic safety, associated apparatus Field circuits: Zone 0, 1, 2 (Div. 1, 2) Functional safety: up to SIL 2 (IEC/EN 61508 / IEC/EN 61511) # Electrical Supply: 24 V DC (Power Rail), 20–90 V DC / 48–253 V AC, 115 V AC or 230 V AC Inputs: NAMUR sensors, dry contacts, level electrodes Input frequency: 1 mHz to 5 kHz (KFD2-UFC); up to 1 kHz (KFD2-UFT) Analogue output: 0/4–20 mA Switching outputs: relay and passive transistor Electrode sensitivity: 1–150 kΩ adjustable (KF*-ER) Diagnostics: line fault detection (LFD), LEDs to NAMUR NE 44 # Mechanical Mounting: Power Rail or supply terminals

Inputs: NAMUR, contacts, electrodes Frequency: 1 mHz to 5 kHz Outputs: 0/4–20 mA, relay, transistor SIL: up to SIL 2 Channels: 1 or 2

pepperl-fuchs-k-system-moduli-rele

# General Product type: Relay module Brand: Pepperl+Fuchs Series: K-System Channels: 1 or 2 Typical applications: remote reset, fire alarm testing, remote calibration of strain gauges # Certifications Functional safety: up to SIL 3 (IEC/EN 61508) Electromagnetic compatibility: Directive 2014/30/EU, EN 61326-1 # Electrical Supply: 24 V DC or loop powered Input: 15–30 V DC, non-polarised, ≤ 21 mA per channel (KFD0-RO) Output: relay contact Contact rating: 230 V AC / 4 A, 30 V DC / 4 A (KFD0-RO-2); 230 V AC / 2 A, 40 V DC / 2 A (KFD0-RO-Ex2) Switching frequency: < 10 Hz Insulation: reinforced input/output, 300 V rms (IEC/EN 61010-1) # Mechanical Width: 12.5 mm or 20 mm Terminals: screw or removable screw Mechanical life: 5 × 10⁶ switching cycles

Output: relay contact Input: 15–30 V DC Channels: 1 or 2 SIL: up to SIL 3 Supply: 24 V DC or loop

industriale

pepperl-fuchs-k-system-condizionatori-segnali-analogici

# General Product type: Isolated signal conditioner for analogue signals Brand: Pepperl+Fuchs Series: K-System Functions: transmitter power supply, SMART current driver, repeater, current/voltage converter, RTD, universal temperature, trip value converter, solenoid driver Channels: 1 or 2 Installation: safe area, non-intrinsically safe circuits # Certifications Functional safety: up to SIL 3 (IEC/EN 61508) Electromagnetic compatibility: Directive 2014/30/EU, EN 61326-1 # Electrical Supply: 24 V DC (Power Rail), 20–90 V DC / 48–253 V AC or loop powered Inputs: 4–20 mA, 0–20 mA, 0–10 V, 0–60 mV, 2- or 3-wire Pt100, RTDs and thermocouples (UT2) Outputs: 4–20 mA, 0/4–20 mA, 0/2–10 V, 0/1–5 V, relay (KF*-USC) Protocol: HART (SMART current drivers and power supplies) Accuracy: 0.1 % of full scale (KFD0-TR, KFD0-CC) Diagnostics: line fault detection (LFD), sensor breakage # Mechanical Width: 12.5 mm or 20 mm Terminals: screw, removable screw or push-in spring Settings: DIP switches, potentiometers or keypad

Signals: 4–20 mA, voltage, RTD, TC Protocol: HART Channels: 1 or 2 SIL: up to SIL 3 Area: safe area, non-Ex

industriale

pepperl-fuchs-k-system-condizionatori-segnali-digitali

# General Product type: Signal conditioner for digital signals Brand: Pepperl+Fuchs Series: K-System Functions: switch amplifier, timer relay, solenoid driver, frequency converter, speed monitor, electrode relay, trip value converter, transmitter power supply Channels: 1, 2 or 4 Installation: safe area, non-intrinsically safe circuits # Certifications Functional safety: up to SIL 2 (IEC/EN 61508 / IEC/EN 61511) # Electrical Supply: 24 V DC (Power Rail), 20–90 V DC / 48–253 V AC, 115 V AC or 230 V AC Inputs: NAMUR sensors (EN 60947-5-6), dry contacts, level electrodes, logic inputs Outputs: relay, active transistor or passive transistor Output current: 600 mA per channel, 1.2 A in parallel (KFD2-SL-4) Contact rating: 253 V AC / 2 A, 40 V DC / 2 A (KFA6-ER) Diagnostics: line fault detection (LFD), LEDs to NAMUR NE 44 # Mechanical Width: 12.5 mm or 20 mm Terminals: screw, removable screw or push-in spring

Inputs: NAMUR, contacts, electrodes Outputs: relay or transistor Channels: 1, 2 or 4 SIL: up to SIL 2 Area: safe area, non-Ex

industriale

pepperl-fuchs-k-system-accessori-power-rail-alimentatori

# General Product type: Accessories and power supply for K-System Brand: Pepperl+Fuchs Series: K-System Components: Universal Power Rail, inserts, covers, end caps, spacers, power feed modules, power supply, terminal blocks, coding pins, place holder modules, socket, USB adapter # Certifications Electromagnetic compatibility: Directive 2014/30/EU (KFA6-STR-1.24.4) # Electrical KFA6-STR-1.24.4 power supply: input 92–265 V AC, 47–63 Hz; output 24 V DC, max. 4 A Efficiency: typ. 87 % (KFA6-STR-1.24.4) Output protection: 4 AT fuse, electronic limiting typ. 4.6 A Cold junction compensation: Pt100 integrated in the terminal block (K-CJC, KC-CJC) # Mechanical Mounting: 35 mm DIN rail to EN 60715 CJC terminal blocks: screw, removable, max. 2.5 mm² core cross section Ambient temperature: -40 to 70 °C (UPR-E) K-MS socket: polyamide PA 66, 20 × 20 × 79 mm

System: K-System, Power Rail Power supply: 24 V DC / 4 A Mounting: 35 mm DIN rail Terminals: blue and green, removable Configuration: USB adapter

industriale

pepperl-fuchs-hic-barriere-isolate-analogiche-h-system

# General Product type: Intrinsically safe isolated barrier Brand: Pepperl+Fuchs Series: H-System HiC Functions: SMART transmitter power supply, SMART current driver, temperature converter, universal barrier Channels: 1 or 2 Mounting: on HiC termination board Protocols: HART, BRAIN (HiC2025, HiC2027) Accessory: H-CJC-Pt100 for cold junction compensation (HiC2081) # Certifications ATEX: II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I Zone 2 installation: II 3G Ex ec IIC T4 Gc (model dependent) IECEx: [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Other approvals: cULus, FM (model dependent) SIL: SIL 2 / SIL 3 acc. to IEC/EN 61508 (model dependent) # Electrical Supply: 19 … 30 V DC via termination board Signals: 0/4 … 20 mA, 0/1 … 5 V Temperature inputs: thermocouple, RTD, mV, potentiometer (HiC2081) Current driver output: 4 … 20 mA, load 100 … 650 Ω (HiC2031ES) Typical Ex parameters: Uo 25.2 V, Io 100 mA, Po 630 mW Maximum safe voltage Um: 250 V Galvanic isolation: 375 V peak acc. to IEC/EN 60079-11 # Mechanical Dimensions: 12.5 x 106 x 128 mm (W x H x D) Mass: approx. 100 g Degree of protection: IP20 Ambient temperature: -40 … 70 °C

Type: Ex ia isolated barrier Mounting: HiC termination board Signals: AI, AO, temperature Communication: HART SIL: up to SIL 3

pepperl-fuchs-hic-barriere-isolate-digitali-h-system

# General Product type: Intrinsically safe isolated barrier for digital signals Brand: Pepperl+Fuchs Series: H-System HiC Functions: switch amplifier, solenoid driver, relay module Channels: 1 or 2 Mounting: on HiC termination board # Certifications ATEX: II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I HiC5861 relay module: II 3G Ex nC ec IIC T4 Gc (Zone 2 installation) IECEx: [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I UL: E106378 SIL: SIL 2 / SIL 3 acc. to IEC/EN 61508 (model dependent) Performance level: PL e acc. to EN/ISO 13849 (HiC5861) # Electrical Supply: 19 … 30 V DC via termination board or loop powered Input: NAMUR or dry contact, approx. 10 V DC / 8 mA Outputs: passive transistor, resistive transistor (LFT), relay Solenoid driver output: ≥ 12 V at 45 mA (HiC2871) Relay module load: up to 30 V (HiC5861) Switching frequency: ≤ 5 kHz (transistor switch amplifiers) Galvanic isolation: 375 V peak acc. to IEC/EN 60079-11 # Mechanical Dimensions: 12.5 x 106 x 128 mm (W x H x D) Mass: approx. 90 g Degree of protection: IP20 Ambient temperature: -40 … 70 °C

Type: Ex ia isolated barrier Inputs: NAMUR / dry contact Outputs: transistor or relay Diagnostics: LFD, NE 44 SIL: up to SIL 3

pepperl-fuchs-hic-schede-di-terminazione-accessori-h-system

# General Product type: Termination board and accessories for HiC barriers Brand: Pepperl+Fuchs Series: H-System Slots: 8, 16, 32 System side: screw terminals (SCT) or 37-pin male Sub-D (SDC) Accessories: Fault Indication Board, HART Communication Board, HART cable, label carrier # Certifications ATEX: II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I IECEx: [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I UL: E106378 Electromagnetic compatibility: Directive 2014/30/EU, NE 21 # Electrical Supply: 24 V DC redundant (Fault Indication Board 19.6 … 30 V DC) Fusing: 2 A (8 slots), 4 A per group of 16 modules Fault output: volt-free contact, 30 V DC, 1 A Maximum safe voltage Um: 250 V HART Communication Board interface: 2 x RS-485 # Mechanical Dimensions: 108 x 200 x 163 mm (8 slots), 216 x 200 x 163 mm (16 slots) Mass: approx. 450 g (8 slots), 760 g (16 slots) Core cross-section: 0.25 … 1.5 mm² Housing: polycarbonate, 10 % glass-fibre reinforced Mounting: 35 mm DIN rail acc. to EN 60715 Degree of protection: IP20 Ambient temperature: -20 … 60 °C HART cable: 34-pin FLK, length 6 m

Slots: 8, 16, 32 System side: screw or 37-pin Sub-D Supply: 24 V DC redundant Fault: volt-free contact 30 V, 1 A HART: up to 32 channels per board

pepperl-fuchs-sc-system-condizionatori-di-segnale-power-bus

# General Product type: Signal conditioner (non-Ex i circuits) Brand: Pepperl+Fuchs Series: SC-System Functions: isolator, transmitter power supply, splitter, temperature and mV converter, trip and switch amplifier, speed monitor Channels: 1 or 2 Configuration: DIP switches, potentiometer or software via S-ADP-USB Accessories: Power Bus, power feed module, covers, end caps # Certifications ATEX: II 3G Ex nA IIC T4 Gc (Zone 2 installation) IECEx: Ex nA IIC T4 Gc UL: E106378 Electromagnetic compatibility: Directive 2014/30/EU, EN 61326-1 # Electrical Supply: 16.8 … 31.2 V DC via terminals or Power Bus Inputs: 0/4 … 20 mA, 0/2 … 10 V, TC, RTD, mV (±60 … ±500 mV), frequency 10 mHz … 50 kHz Outputs: 0/4 … 20 mA, 0/1 … 5 V, 0/2 … 10 V, ±5 V, ±10 V, relay Accuracy: 0.1 % of full-scale value (analogue modules) Insulation: reinforced acc. to IEC/EN 61010-1 Power Bus: max. 3 A via S1SD-2PF # Mechanical Module dimensions: 6.2 x 97 x 107 mm (W x H x D) Mass: approx. 70 g Core cross-section: 0.5 … 2.5 mm² Power Bus: length 250 or 500 mm, height 7.5 or 15 mm Degree of protection: IP20 Ambient temperature: -25 … 70 °C

Width: 6.2 mm Supply: 24 V DC or Power Bus Accuracy: 0.1 % Insulation: reinforced IEC 61010-1 Installation: safe area or Zone 2

industriale

pepperl-fuchs-multiplexer-hart-kfd2-hmm-hidmux2700

# General Product type: HART multiplexer and connection cables Brand: Pepperl+Fuchs Series: K-System / H-System Channels: 16 (KFD2-HMM-16, KFD0-HMS-16), 32 (HiDMux2700) Instruments per primary module: up to 256 Mounting: 35 mm DIN rail (KFD), HiD termination board or HART Communication Board (HiDMux2700) Software: PACTware, AMS # Certifications ATEX: II 3G Ex nA IIC T4 Gc (KFD), II 3G Ex ec IIC T4 Gc (HiDMux2700) IECEx: Ex ec IIC T4 Gc (HiDMux2700) CSA: Class I, Division 2 (HiDMux2700) SIL: up to SIL 3 acc. to IEC/EN 61508 # Electrical Supply: 20 … 32 V DC (KFD2-HMM-16, also via Power Rail), 20.4 … 30 V DC (HiDMux2700) Power consumption: max. 3 W (KFD2-HMM-16), 0.7 W at 24 V (HiDMux2700) Interface: RS-485 2-wire multidrop Transfer rate: 9600, 19200 or 38400 bit/s HART revision: 5 … 7 External terminating resistor: 230 … 500 Ω (up to 1000 Ω) # Mechanical KFD2-HMM-16 dimensions: 40 x 107 x 115 mm, approx. 250 g KFD0-HMS-16 dimensions: 20 x 93 x 115 mm, approx. 100 g HiDMux2700 dimensions: 18 x 114 x 130 mm, approx. 140 g Cables: K-HM14 14-pin 0.45 m; K-HM26 26-pin 1 m standard, 2, 3, 5 m Degree of protection: IP20 Ambient temperature: -20 … 60 °C

Channels: 16 or 32 per module Capacity: up to 256 instruments Interface: RS-485 multidrop HART: revision 5 … 7 SIL: up to SIL 3

pepperl-fuchs-viator-modem-hart-usb-rs232-bluetooth

# General Product type: HART modem / interface Brand: Pepperl+Fuchs Series: Viator Interfaces: USB, RS-232, Bluetooth Operating systems: Windows 7, 10, 11 Field connection: test clips, load resistor 250 … 1100 Ω # Certifications ATEX (HM-PF-BT-EX): II 1G Ex ia IIC T4 Ga, -20 °C ≤ Ta ≤ 50 °C IECEx (HM-PF-BT-EX): Ex ia IIC T4 Ga UL (HM-PF-BT-EX): Class I, Div. 1 or Div. 2, Groups A, B, C, D T4; Class I, Zone 0 AEx ia IIC T4 Ga Radio (Bluetooth): FCC Part 15 B, IC ICES-003 Conformity: EMC Directive 2014/30/EU, RoHS 2011/65/EU # Electrical Signal: 0.5 Vpp HART trapezoidal wave at 1200/2200 Hz Supply: from USB or RS-232 port; 3 x AAA batteries (Bluetooth) Bluetooth operating time: approx. 80 h continuous Bluetooth: v2.1 Class 2 EDR, 2402 … 2480 MHz, 20 m range Galvanic isolation: 1500 V DC (USB, RS-232) # Mechanical Housing: polycarbonate Dimensions: 49 x 33 x 15 mm (RS-232), 75 x 33 x 15 mm (USB), 88 x 42 x 19 mm (Bluetooth) Cable: 1.8 m (USB, RS-232), 0.5 m (Bluetooth) Degree of protection: IP20 Operating temperature: -20 … 50 °C

Interfaces: USB, RS-232, Bluetooth Protocol: HART Supply: port or batteries Ex version: Ex ia IIC T4 Ga Systems: Windows 7, 10, 11

pepperl-fuchs-barriere-zener-z700-z800-z900

# General Product type: Intrinsically safe Zener barrier Brand: Pepperl+Fuchs Series: Z7xx, Z8xx, Z9xx Channels: 1, 2, 3 Polarity: positive DC, negative DC, AC Versions: standard, 1 kΩ, current limiting, diode return, high power, asymmetrical, replaceable fuse Accessories: ZH-Z.ES, ZH-Z.LL, ZH-Z.AR.125, ZH-Z.BT, ZH-ES/LB # Certifications ATEX: II (1)GD, I (M1) [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Zone 2 installation: II 3G Ex nA IIC T4 Gc IECEx: [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I; Ex ec IIC T4 Gc Other approvals: FM, cULus # Electrical Working voltage: 0.6 … 26.5 V Series resistance: 15.5 … 2030.5 Ω Fuse rating: 50 … 250 mA Voltage Uo: up to 28 V (model dependent) Maximum safe voltage Um: 250 V # Mechanical Dimensions: 12.5 x 115 x 116 mm (W x H x D) Mass: approx. 150 g Connection: screw terminals, max. 2 x 2.5 mm² Mounting: 35 mm DIN rail acc. to EN 60715 Degree of protection: IP20 Ambient temperature: -20 … 60 °C

Type: Zener barrier [Ex ia] Channels: 1, 2 or 3 Polarity: DC +, DC −, AC Working voltage: 0.6 … 26.5 V Width: 12.5 mm, DIN rail

pepperl-fuchs-mft-morsetti-multifunzione-ex-d-e

# General Product type: Ex d e multifunction terminal Brand: Pepperl+Fuchs Series: MFT Modules: fuse, dual fuse, diode, dual diode, resistor, dual resistor, NO/NC relay, PA/FF bus terminator Sockets: MFT-BASE.2P (2-pole), MFT-BASE.4P (4-pole), ordered separately Main function: maintenance without hot work permit # Certifications ATEX: II 2 G Ex d e IIC (PTB 07 ATEX 1004 U) IECEx: Ex d e IIC Gb (IECEx BKI 08.0008U) Marine: DNV GL SIL: up to SIL 3 acc. to IEC/EN 61508 # Electrical Nominal voltage: max. 250 V AC, max. 30 V DC Fuses: 0.05 … 6.3 A, time-lag T Diodes: 1 x 1 A or 2 x 0.5 A Resistors: 0.5 W Relay: 24 V control, contacts max. 250 V AC / 30 V DC, 1 A # Mechanical Dimensions: 93 x 17.5 x 79 mm (L x W x H) Mass: approx. 115 g (model dependent) Core cross-section: 0.5 … 2.5 mm² Tightening torque: 0.5 … 1 Nm Degree of protection: IP20, IP30 with module plugged in Ambient temperature: -55 … 70 °C (fuses ≤ 1.5 A), -55 … 55 °C (fuses > 1.5 A)

Protection: Ex d e IIC Installation: Zone 1 Modules: fuse, diode, relay Maintenance: no hot work permit SIL: up to SIL 3

pepperl-fuchs-m-lb-scaricatori-sovratensione-linee-segnale

# General Product type: Surge protection barrier for signal lines Brand: Pepperl+Fuchs Series: M-LB-2000, M-LB-4000 Protected lines: 2 or 3 Topology: non-earthed or earthed lines Version: safe area / Zone 2 or Ex i (M-LB-EX) Supply scope: base + module or protection module only (.M) Accessories: M-LB-2800, M-LB-4400, M-LB-4800 # Certifications ATEX: II 3G Ex ec IIC T4 Gc (M-LB-2000: T6 … T4) IECEx: Ex ec IIC T4 Gc UL: E501704 SIL: up to SIL 3 acc. to IEC/EN 61508 Standards: IEC 61643-21; EN 61643-11 Type 1/P2 (M-LB-4000) # Electrical Nominal voltage: 1 … 230 V Max. surge current (8/20 µs): 20 kA Nominal discharge current (8/20 µs): 5 kA per line Impulse discharge current (10/350 µs): 1 … 1.5 kA per line Rated current: 500 mA (M-LB-2112), 0.75 A at 70 °C (M-LB-4212) Series resistance: 1 … 3 Ω per line # Mechanical Dimensions: 6.2 x 93 x 72.4 mm (M-LB-2000), 6 x 90 x 69 mm (M-LB-4000) Terminals: screw or push-in spring Housing: polyamide Mounting: 35 mm DIN rail acc. to EN 60715 Degree of protection: IP20 Ambient temperature: -40 … 80 °C

Lines: 2 or 3 signal lines Nominal voltage: 1 … 230 V Max. surge (8/20 µs): 20 kA Version: Zone 2 or Ex i SIL: up to SIL 3

pepperl-fuchs-m-lb-scaricatori-sovratensione-alimentazione

# General Product type: Surge protection barrier for power supply lines Brand: Pepperl+Fuchs Series: M-LB Type: Type 2 / Class II and Type 3 / Class III acc. to EN/IEC 61643-11 Protected lines: 1, 2, 3, 4 Systems: single-phase, TN, TN-C, TN-S, TT Supply scope: base + module (.D) or protection module only (.M) # Certifications Conformity: Low Voltage Directive 2014/35/EU, EN 61643-11 M-LB-2.30.T3.D: ATEX II 3G Ex ec IIC T4 Gc, IECEx Ex ec IIC T4 Gc, UL # Electrical Nominal voltage: 24 V AC, 120 V AC, 230 V AC, 230/400 V AC Max. continuous operating voltage Uc: 30 V, 150 V, 255 V, 275 V AC Nominal discharge current In (8/20 µs): 15 … 20 kA (Type 2), 1 … 3 kA (Type 3) Max. surge current Imax (8/20 µs): 40 kA (Type 2), 2 … 5 kA (Type 3) Voltage protection level Up: max. 1.25 kV (Type 2, 230 V) Reaction time: max. 25 ns Short-circuit withstand: 50 kA rms (Type 2), 6 kA rms (Type 3) Mains-side overcurrent protection: max. 125 A gG (Type 2), max. 25 A gL/gG (Type 3) Fault contact: volt-free change-over, 250 V AC / 0.5 A # Mechanical Width: 18 mm per pole (1 TE acc. to DIN 43880), 72 mm for 4 poles Dimensions: 18 x 90 x 72 mm (1 pole) Housing: grey thermoplastic, UL 94 V-0 Mounting: 35 mm DIN rail acc. to EN 60715 Degree of protection: IP20 Ambient temperature: -40 … 80 °C

Type: 2 and 3 acc. to EN 61643-11 Systems: single-phase, TN, TT Imax (8/20 µs): up to 40 kA Modules: tool-free replacement Signalling: change-over contact

industriale

pepperl-fuchs-scaricatori-sovratensione-da-campo-fs-lb-p-lb

# General Product type: Surge protection barrier for signal lines Brand: Pepperl+Fuchs Series: FS/FP/FN-LB-I, P-LB Channels: 1 (F*-LB-I), 1 or 2 (P-LB) Mounting: instrument cable entry (F*-LB-I), field side of KF module (P-LB) Thread: M20 x 1.5 (FS), PG13.5 (FP), 1/2" NPT (FN) # Certifications ATEX F*-LB-I: II 2G Ex ia IIC T6 ATEX P-LB: II (1)G [Ex ia Ga] IIC; II 3G Ex nA IIC T4 Gc IECEx P-LB: [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I CSA: F*-LB-I (cCSAus) SIL: up to SIL 3 acc. to IEC/EN 61508 # Electrical Rated voltage: ≤ 48 V (F*-LB-I), max. 30 V (P-LB) Rated current: ≤ 250 mA Discharge current: 20 kA total (F*-LB-I), 10 kA per conductor (P-LB) Clamping voltage: 85 V line-to-line (F*-LB-I), 45 V (P-LB) Insulation to earth: 500 V Leakage current: ≤ 5 µA Response time: 1 ns symmetrical, 100 ns asymmetrical # Mechanical F*-LB-I housing: stainless steel 1.4401 (AISI 316), AF22, length 77 mm, 0.3 m cable Mass: approx. 200 g (F*-LB-I), 70 g (P-LB) P-LB dimensions: 20 x 104 x 127 mm Degree of protection: IP67 (F*-LB-I), IP20 (P-LB) Ambient temperature: -30 … 60 °C (F*-LB-I), -20 … 60 °C (P-LB)

Mounting: instrument or KF module Threads: M20, PG13.5, 1/2" NPT Discharge: up to 20 kA (8/20 µs) Installation: Zone 1 (F*-LB-I) SIL: up to SIL 3

pepperl-fuchs-fieldconnex-lbf-protezioni-sovratensione-fieldbus

# General Product type: Fieldbus surge protector Brand: Pepperl+Fuchs Series: FieldConnex LBF Field-mount protectors: FS-LBF, FN-LBF DIN rail modules: DB-LBF base, DP-LBF plug-in module Modules for Segment Protector / junction box: SCP-LBF, TCP-LBF, TPH-LBF Accessories: ACC-LBF-EB.6 / EB.8 earth bars, ACC-LBF-SW.3 trunk/spur separation wall # Mechanical Thread (field-mount protectors): M20 x 1.5 / 1/2" NPT Mounting: on instrument, DIN rail, Segment Protector / junction box

Type: Surge protector Application: Fieldbus networks Mounting: Field, DIN rail, SP Thread: M20 x 1.5 or 1/2" NPT Accessories: Earth bars, walls

pepperl-fuchs-lb-remote-io-zona-2

# General Product type: Remote I/O system Brand: Pepperl+Fuchs Series: LB Remote I/O Functions: digital inputs, frequency/counter inputs, digital outputs, relay outputs, HART universal I/O, HART transmitter power supplies, HART output isolators, TC/RTD converters, voltage converters Communication: MODBUS RTU, MODBUS TCP, PROFIBUS DP/DP-V1 (EasyCom, Unicom), PROFINET gateway Channels per module: 1, 2, 4, 8 # Certifications Installation: Zone 2, Class I/Div. 2 or safe area Field circuits: Ex ia Connected instruments: Zone 0, 20 # Electrical I/O module supply: 12 V DC via backplane (only with LB9*** power supplies) Digital inputs (LB1109A): NAMUR sensors to EN 60947-5-6 or dry contacts Switching point (LB1109A): 1.2…2.1 mA / ± 0.2 mA Power consumption (LB1109A): 1.55 W Terminal blocks LB9126A / LB9127A: 160 V, 8 A # Mechanical Occupied slots (LB1109A): 1 Terminal blocks: spring (LB9126A) or front screw (LB9127A), 8-pole, blue, for Ex ia/Ex ib Terminal core cross-section: 0.14…1.5 mm²

Installation: Zone 2 / safe area Field circuits: Ex ia Channels: 1, 2, 4, 8 Bus: MODBUS, PROFIBUS DP, PROFINET Replacement: Under voltage

pepperl-fuchs-fb-remote-io-zona-1

# General Product type: Remote I/O system Brand: Pepperl+Fuchs Series: FB Remote I/O Functions: digital inputs, frequency/counter inputs, digital outputs, relay outputs, HART universal I/O, HART transmitter power supplies, HART output isolators, TC/RTD converters Communication: MODBUS RTU, MODBUS TCP, PROFIBUS DP/DP-V1 (EasyCom, Unicom), PROFINET gateway Backplanes: base, extension, redundant, universal Channels per module: 1, 2, 4, 8 # Certifications Installation: in suitable enclosures in Zone 1 Field circuits: Ex ia Connected instruments: Zone 0, 20 Conformity (FB9215B2): EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, NE 21 # Electrical I/O module supply: 12 V DC via backplane (only with FB92** power supplies) Digital inputs (FB1209B3): 8 channels, NAMUR sensors or dry contacts Frequency input (FB1203B3): 0…15 kHz, counter, direction of rotation Transmitter supply (FB7204B3): min. 15 V at 20 mA; 21.5 V at 4 mA Power supply FB9215B2: 90…253 V AC, 50…60 Hz; outputs 5.4 V DC and 12 V DC FB9215B2 capacity: 24 I/O modules and 1 bus coupler # Mechanical Occupied slots (I/O modules): 1 Ambient temperature (FB9215B2): -20…60 °C Storage temperature (FB9215B2): -25…85 °C Relative humidity (FB9215B2): 95 % non-condensing

Installation: Zone 1 (in enclosure) Field circuits: Ex ia Replacement: Hot swap Bus: MODBUS, PROFIBUS DP, PROFINET Supply: 90…253 V AC / 24 V DC

pepperl-fuchs-field-unit-remote-io-lb-fb

# General Product type: Remote I/O field unit Brand: Pepperl+Fuchs Series: LB / FB Remote I/O Systems: LB (Zone 2 or safe area), FB (Zone 1) Enclosure: stainless steel or polyester (GRP) Example LB9547-S70: MODBUS TCP, RJ-45 connector (not included), fieldbus and power supply redundancy Installed components (LB9547-S70): backplanes LB9022E, LB9024A # Certifications Installation: Zone 2 or safe area (LB), Zone 1 (FB) Conformity (LB9547-S70): EMC Directive 2014/30/EU # Electrical Rated voltage (LB9547-S70): 24 V DC Maximum safe voltage Um (LB9547-S70): 60 V Power connection (LB9547-S70): screw terminals, max. 10 mm² # Mechanical Slots (LB9547-S70): 2 bus couplers, 6 power supplies, max. 46 single-width or 23 dual-width I/O modules Enclosure (LB9547-S70): electropolished 316L stainless steel, IP66/NEMA 4X, rain channel, one-piece seal Backplane cable FB9274-300: 12-pin, grey, 300 cm, 530 g

Systems: LB (Zone 2) / FB (Zone 1) Enclosure: Stainless steel or GRP I/O modules: Up to 46 (LB9547) Protection: IP66/NEMA 4X (LB9547) Redundancy: Fieldbus and power

pepperl-fuchs-fieldconnex-power-hub-alimentatori-fieldbus

# General Product type: Fieldbus power and diagnostics Brand: Pepperl+Fuchs Series: FieldConnex Power Hub Protocols: FOUNDATION Fieldbus H1, PROFIBUS PA Components: motherboards, fieldbus power supplies, diagnostic modules, PA segment couplers, gateways, Ethernet isolator, Diagnostic Manager software Segments per motherboard: 4, 8 Redundancy: simplex or redundant Host connection: screw terminals, removable terminals, system connector (HSC) # Certifications Installation: Zone 2 / Class I, Div. 2 Segment Coupler output KFD2-BR-Ex1.3PA.93: Ex ia IIC, FISCO or Entity Conformity (HD2-DM-B): EMC Directive 2014/30/EU # Electrical KFD2-BR-Ex1.3PA.93: supply 20…35 V DC; output 12.6…13.4 V / max. 100 mA; PROFIBUS DP at 93.75 kbit/s KLD2-FBPS-1.12.220: supply 10…30 V DC; output 12…13 V / 220 mA; dissipation typ. ≤ 0.5 W HD2-DM-A: 19.2…35 V; dissipation max. 2 W; up to 4 segments HD2-DM-B: 19.2…35 V; 20 mA; alarm contact 1 A, 50 V DC (NC)

Protocols: FF H1, PROFIBUS PA Segments: 4 or 8 per motherboard Redundancy: Simplex or redundant Installation: Zone 2 / Div. 2 Diagnostics: Advanced and basic

pepperl-fuchs-fieldconnex-segment-protector

# General Product type: Fieldbus Segment Protector Brand: Pepperl+Fuchs Series: FieldConnex Segment Protector (R2, F2, R) Protocols: FOUNDATION Fieldbus H1, PROFIBUS PA Spur outputs: 4, 6, 8, 10, 12 Terminator: integrated, selectable (100 Ω on R-SP-E12) # Certifications R2 / F2: Ex ic outputs, FISCO or Entity; installation in Zone 2; instruments in Zone 2 or Zone 1 (with additional protection) R-SP-E12: Ex e outputs; installation in Zone 1 / Div. 2; instruments in Zone 1 / Div. 1 # Electrical Trunk voltage (F2-SP-IC): 9…31 V DC, max. 4.5 A Trunk voltage (R-SP-E12): 9…32 V DC Current per output (R-SP-E12): max. 40 mA; short-circuit max. 52 mA Voltage drop trunk/outputs (R-SP-E12): max. 1.3 V Surge protection (R-SP-E12): triggers at typ. 39 V # Mechanical Mounting: DIN rail (R2, R) or field enclosure (F2) F2 enclosure: aluminium, stainless steel, polyester Trunk entry (e.g. F2-SP-IC08.0.05.05.11): M20 nickel-plated brass gland for armoured cable Terminals: screw or spring, fixed or plug-in

Spur outputs: 4…12 Output protection: Ex ic / Ex e Installation: Zone 2 (R2/F2), Zone 1 Protocols: FF H1, PROFIBUS PA Mounting: DIN rail or F2 enclosure

pepperl-fuchs-fieldconnex-fieldbarrier

# General Product type: Fieldbus barrier Brand: Pepperl+Fuchs Series: FieldConnex FieldBarrier Protocols: FOUNDATION Fieldbus H1, PROFIBUS PA Ex ia outputs: 4, 8, 10, 12 Mounting: F2 field enclosure, DIN rail (RD0, R4D0) # Certifications Outputs: Ex ia IIC, FISCO or Entity Installation: Zone 1 / Div. 2 Connected instruments: Zone 0…1 / Div. 1 # Mechanical F2 enclosure: cast aluminium, for outdoor installation Electronic component (F2D0-FB-EX4): RD0-FB-Ex4.* Trunk entry (F2D0-FB-EX4.CG): M20 plastic cable gland Spur entries: M16 plastic or stainless steel glands (depending on version) Output terminals: screw or spring, 1 device per output

Outputs: 4, 8, 10, 12 Ex ia IIC Installation: Zone 1 / Div. 2 Instruments: Zone 0…1 Protocols: FF H1, PROFIBUS PA Mounting: F2 enclosure or DIN rail

pepperl-fuchs-fieldconnex-multi-input-temperatura-multi-io

# General Product type: Fieldbus I/O device Brand: Pepperl+Fuchs Series: FieldConnex TI / MIO Protocols: FOUNDATION Fieldbus H1, PROFIBUS PA Versions: 8 temperature inputs (TI); digital multi-I/O (MIO) MIO PROFIBUS PA integration: GSD and FDT/DTM MIO FOUNDATION Fieldbus integration: device description and function blocks, ITK 6.1.1 # Certifications MIO: installation in Zone 1 / Div. 1, intrinsically safe MIO: sensors in Zone 0 / Div. 1 Fieldbus connection: FISCO or Entity (profiles 511 and 111 for FF) # Electrical MIO inputs/outputs: up to 12 digital inputs, 4 digital outputs MIO valves: control and feedback for 4 low-power valves (compatible with FD0-VC-Ex*, FD0-BI-*) MIO special inputs: 4 for vibrating forks, 1 frequency/counter FDE (MIO PA): 6.7 mA Power: from the fieldbus # Mechanical Mounting: DIN rail (RD0, R8D0) or F2 field enclosure (F2D0) MIO terminals: removable, with test points

Protocols: FF H1, PROFIBUS PA TI: 8 temperature inputs MIO: 12 DI + 4 DO MIO installation: Zone 1 Mounting: DIN rail or F2 enclosure

pepperl-fuchs-fieldconnex-accessori-fieldbus

# General Product type: Fieldbus accessories Brand: Pepperl+Fuchs Series: FieldConnex Protocols: FOUNDATION Fieldbus H1, PROFIBUS PA Functions: terminators, T-connectors, voltage adjustment module, enclosure leakage sensor, diagnostic handheld, motherboard accessories # Certifications KLD0-SAA: II 3 G Ex ec IIC T4 Gc, certificate PF 16 CERT 1030 X, installation in Zone 2 / Div. 2 ELS-1: Ex ia, FISCO or Entity, installation in Zone 1 / Div. 1 FDH-1: Ex ia fieldbus interface, FISCO, Entity and DART; operation in Zone 1 / Class I, Div. 1 Conformity (KLD0-SAA, ELS-1): EMC Directive 2014/30/EU # Electrical KLD0-SAA: host side 9…32 V DC; voltage reduction 0.9…1.8 V; max. 1 A; dissipation max. 1.8 W ELS-1: 9…32 V; current consumption max. 6 mA FDH-1: 8.5…35 V; powered from fieldbus, 9 V 6LR61 battery or USB # Mechanical KLD0-SAA: 20 x 115 x 107 mm, IP20, approx. 100 g, DIN rail, removable terminals up to 2.5 mm² KLD0-SAA ambient temperature: -20…60 °C ELS-1 ambient temperature: -40…80 °C T-CON.3.BU: 3-pole double-screw T-connector, pack of 4

Protocols: FF H1, PROFIBUS PA Diagnostics: FDH-1 handheld, Zone 1 Sensor: ELS-1 leakage, Ex ia Voltage: KLD0-SAA, -0.9…1.8 V Connections: Terminators, T-connectors

pepperl-fuchs-ethernet-apl-rail-field-switch

# General Product type: Ethernet-APL field switch Brand: Pepperl+Fuchs Series: FieldConnex Ethernet-APL Rail Field Switch ARS11 / ARS12 Versions: ARS11 (APL + PROFIBUS PA proxy), ARS12 (APL only) Spur ports: 8, 16, 24 Ethernet ports: 2 x 1000BASE-T, 2 x SFP PROFINET: Class B, MRP, S2 redundancy, dynamic reconfiguration Configuration and diagnostics: FDI, web, PROFINET device functions, SNMP Network security: SNMPv3, HTTPS, locking of unused ports # Certifications Switch installation: Zone 2 Spur ports: Ex ic (instruments in Zone 2) or Ex ia (instruments in Zone 0/1), to 2-WISE and FISCO # Electrical Power input: redundant, 20…60 V DC # Mechanical Spur terminals: screw or spring ACC-ARS-SW separation wall: 50 mm clearance between non-intrinsically safe circuits and spur terminals, polycarbonate, pack of 2 ACC-PC-45 / ACC-PC-SFP covers: polycarbonate, pack of 10

Spur ports: 8, 16, 24 Spur protection: Ex ic or Ex ia Installation: Zone 2 Uplinks: 2 x 1000BASE-T + 2 x SFP Power: 20…60 V DC redundant

pepperl-fuchs-cassette-fieldbarrier-fieldconnex

# General Product type: Fieldbus junction box with FieldBarrier Brand: Pepperl+Fuchs Series: FieldConnex F.FB0 · F.FB1 Installed components: RD0-FB-Ex4.COM (FB0), R4D0-FB-IA* (FB1) Fieldbus: FOUNDATION Fieldbus H1, PROFIBUS PA Number of outputs: 4, 8, 10, 12 # Certifications Gas marking: II 2(1)G Ex db eb mb [ia] IIC T4 Gb Dust marking: II 2(1)D Ex tb [ia Da] IIIC T135°C Db ATEX certificate: PTB 07 ATEX 1061 X IECEx certificate: IECEx PTB 07.0036 X # Mechanical Enclosure: Polyester GRP, electropolished 316 or brushed 316L stainless steel Degree of protection: IP66 Cable entries: M20 cable glands or stopping plugs Ambient temperature: −40…+60 °C (brushed SS), −30…+55 °C (GRP)

Installation: Zone 1, devices in Zone 0 Outputs: 4–12 Ex ia Bus: FF H1 and PROFIBUS PA Enclosure: GRP or 316L stainless steel Degree of protection: IP66

pepperl-fuchs-cassette-segment-protector-fieldconnex

# General Product type: Fieldbus junction box with Segment Protector Brand: Pepperl+Fuchs Series: FieldConnex F.SP5 · F.SPE · SPJB Installed components: R2-SP-IC* (F.SP5, SPJB), R-SP-E12 (F.SPE) Fieldbus: FOUNDATION Fieldbus H1, PROFIBUS PA Number of outputs: 4…24 # Certifications F.SP5 marking: II 3G Ex eb nA [ic] IIC T4 Gc, II 3D Ex tc [ic] IIIC T135°C Dc F.SP5 certificates: PTB 17 ATEX 1011 X, IECEx PTB 09.0016 X F.SPE marking: II 2G Ex db eb mb IIC T4 Gb, II 2D Ex tb IIIC T135°C Db F.SPE certificate: PTB 07 ATEX 1061 X SPJB: Class I, Division 2 # Mechanical F.SP5/F.SPE enclosure: Polyester GRP, electropolished or brushed 316L stainless steel SPJB enclosure: Stainless steel, polyester, aluminium, carbon steel, polycarbonate Cable entries: M20 (F.SP5/F.SPE), M16 (SPJB) F.SP5/F.SPE degree of protection: IP66 F.SP5 brushed SS ambient temperature: −40…+60 °C

Installation: Zone 2, Zone 1 or Div. 2 Outputs: 4…24 Bus: FF H1 and PROFIBUS PA Enclosure: GRP, SS, Al, steel, PC Entries: M20 (SPJB M16)

pepperl-fuchs-cassette-fieldconnex-multi-input-output-temperatura

# General Product type: Fieldbus junction box with remote I/O Brand: Pepperl+Fuchs Series: FieldConnex F.TI0 · F.MIO Installed components: RD0-TI-Ex8 (F.TI0), R8D0-MIO-Ex12 (F.MIO) Fieldbus: FOUNDATION Fieldbus H1, PROFIBUS PA Channels: 8 temperature inputs (F.TI0), 12 discrete I/O (F.MIO) # Certifications F.TI0 Zone 1 marking: II 2(1)G Ex ia [ia Ga] IIC T4 Gb F.MIO Zone 1 marking: II 2(1)G Ex ib [ia Ga] IIC T4 Gb Zone 1 certificate: PTB 07 ATEX 1061 X Zone 2 certificate: PTB 17 ATEX 1011 X # Mechanical Enclosure: Polyester GRP, electropolished 316 or brushed 316L stainless steel Degree of protection: IP66 Cable entries: M20 cable glands or stopping plugs

Installation: Zone 1 or Zone 2 F.TI0: 8 temperature inputs F.MIO: 12 discrete I/O Bus: FF H1 or PROFIBUS PA Enclosure: GRP or 316L stainless steel