Services
Tools
Products
>
Lighting
>
Floodlights

Floodlights

products available

Qlight and CEAG LED floodlights and work lights for Zone 2/22 and industrial use, for lighting outdoor areas, plants and machinery.

illuminazione
illuminazione-floodlight
Category
+
Switches
interruttori
interruttori-sezionatori
CEAG and Pepperl+Fuchs Ex safety switches and isolators, including GRP and stainless steel versions, for Zones 1, 2, 21 and 22, plus non-Ex industrial versions.
Plastic cable glands
cablaggio
cablaggio-pressacavi-plastica
CEAG and Pepperl+Fuchs polyamide cable glands, including blue versions for Ex i circuits, with stopping plugs and reducers for Ex e equipment.
Plugs and sockets
connessione
connessione-prese-spine
CEAG plugs and sockets: Ex service sockets and portable socket boards for Zone 1/21 from 16 to 80 A, plus 16 and 32 A industrial sockets for safe areas.
Ex e junction and terminal boxes
custodie
custodie-morsettiere-ex-e
Ex e and Ex i terminal and junction boxes and empty Ex e enclosures in GRP, polyamide and stainless steel.
PCs and remote monitors
display-e-hmi
display-pc-remote-monitor
Pepperl+Fuchs VisuNet PCs, remote monitors and thin clients for hazardous areas, with mounting accessories, power supplies, software licences and spares.
Linear luminaires
illuminazione
illuminazione-lineari
Flameproof linear LED luminaires, including the Qlight QLEX series certified to ATEX/IECEx and NEC, for lighting plants in hazardous areas.
Main switches
interruttori
interruttori-generali
CEAG Ex main and power switches up to 630 A, including changeover, reversing and star-delta versions, for electrical installations in hazardous areas.
Road tankers
messa-a-terra
messa-a-terra-autocisterne
Newson Gale Earth-Rite RTR grounding clamp for road tankers
WiFi access points
networking
networking-access-point-wifi
WiFi access points in Ex d flameproof enclosures for Zone 1/21 and Class I Div. 1, for wireless networks in hazardous areas, including mesh setups.
GRP panels
quadri-elettrici
quadri-grp
GRP (glass-reinforced polyester) panels certified to ATEX and IECEx for power distribution in hazardous areas, including custom-built versions.
Portable detectors
rilevatori-di-gas
rilevatori-portatili
Portable gas detectors for the personal protection of operators and on-site checks in industrial plants and hazardous areas.
Beacons
segnalazione
segnalazione-lampeggianti
Explosion-proof LED beacon
Explosion-proof beacons for visual signalling in hazardous areas, including Qlight multifunction LED models with steady, flashing and strobe light.
Inductive sensors
sensori
sensori-induttivi
Pepperl+Fuchs inductive sensors for non-contact detection of metal objects in automation and, in NAMUR ATEX/IECEx versions, in hazardous areas.
Isolated barriers
sicurezza-intrinseca
sicurezza-barriere-isolate
Pepperl+Fuchs H-System HiC isolated barriers and termination boards for interfacing Ex ia intrinsically safe circuits with control systems.
Fixed cameras
sorveglianza
sorveglianza-telecamere-fisse
Certified fixed cameras for hazardous areas, for continuous video surveillance of industrial plants and sites with potentially explosive atmospheres.
Pressure
strumenti-di-misura
strumenti-pressione
WIKA pressure measurement instrumentation with electrical and mounting accessories, including ATEX and IECEx certified models for hazardous areas.
iPhone
telecomunicazione
telecomunicazione-iphone
iPhones in xShielder explosion-proof covers for Zone 1/21, ATEX certified and, in the cemented-lid version, IECEx certified, for use in hazardous areas.
Drum heaters
riscaldamento
riscaldamento-riscaldatori-fusti
Induction heaters and base plates for drums up to 210 litres, for safe areas and ATEX/IECEx.
Screwdrivers and pliers
utensili
utensili-giraviti-pinze
Non-sparking screwdrivers and pliers
Non-sparking screwdrivers, tweezers, combination and half-round nose pliers, circlip pliers, side cutters, adjustable and blaster's pliers.
Cable trays
supporti-passerelle
supporti-passerelle-portacavi
Ladder, wire mesh (Flextray) and aluminium (KwikRail) cable trays and data centre runways.
Limit switch boxes
automazione-valvole
automazione-valvole-box-finecorsa
Limit switch box with position indicator
Limit switch boxes with micro switches, inductive sensors or position transmitter to signal valve position: polyamide, aluminium and stainless steel, also Ex ia, Ex d and Ex t.
Cable glands for unarmoured cable
cablaggio
cablaggio-pressacavi-cavo-non-armato
Pepperl+Fuchs metal cable glands for unarmoured and screened cables, in nickel-plated brass or stainless steel, for Ex d, Ex e and Ex t enclosures.
Portable power distribution
connessione
connessione-alimentazione-portatile
CEAG and Atexor Ex power cables, extension leads and cable reels with pre-wired plugs and sockets, for portable power supply in hazardous areas.
Ex d flameproof enclosures
custodie
custodie-antideflagranti-ex-d
Ex d flameproof enclosures and junction boxes in aluminium and stainless steel, empty or equipped.
Offshore PCs
display-e-hmi
display-pc-offshore
Ex PCs, keyboards and peripherals for Zone 1 and Zone 2, including intrinsically safe versions, for HMI workstations offshore and in hazardous areas.
High bay
illuminazione
illuminazione-high-bay
CEAG and Dialight LED high bay and pendant luminaires for Zone 1/21, Zone 2 and heavy industry, for warehouses and high-ceiling areas.
Modular switches
interruttori
interruttori-modulari
CEAG Ex 16 A changeover switches in GRP or aluminium, with or without a measuring instrument, for switching electrical circuits in Zone 1/21.
FIBC
messa-a-terra
messa-a-terra-fibc
4G routers and WiFi access points
networking
networking-router-4g
4G/LTE and 5G industrial routers with WiFi hotspot in Ex d enclosures for Zone 1/21 and Class I Div. 1, with VPN and remote management.
Metal panels
quadri-elettrici
quadri-metallici
Metal electrical panels certified to ATEX and IECEx for power distribution in hazardous areas, including custom configurations.
Fixed detectors
rilevatori-di-gas
rilevatori-fissi
Fixed gas detectors for continuous monitoring of gas presence in industrial plants and hazardous areas with potentially explosive atmospheres.
Sounders
segnalazione
segnalazione-sirene
Ex db explosion-proof electronic sounders, including Qlight horns with preset tones and voice messages, for audible signalling in hazardous areas.
Capacitive sensors
sensori
sensori-capacitivi
Pepperl+Fuchs cylindrical and rectangular capacitive sensors for detecting liquids, granules and non-metallic materials in industrial automation.
Zener barriers
sicurezza-intrinseca
sicurezza-barriere-zener
Pepperl+Fuchs 1, 2 or 3-channel DIN-rail Zener barriers for limiting energy in [Ex ia] intrinsically safe circuits connected to Zones 0 and 20.
Thermal cameras
sorveglianza
sorveglianza-telecamere-termiche
Certified thermal cameras for hazardous areas, for thermal monitoring and video surveillance of industrial plants and sites at risk of explosion.
Temperature
strumenti-di-misura
strumenti-temperatura
WIKA temperature measurement instrumentation, from precision thermometers and resistance bridges to accessories, with ATEX and IECEx certified models.
Smartphones
telecomunicazione
telecomunicazione-smartphone
ecom Smart-Ex intrinsically safe 5G Android smartphones for Zone 1/21, Zone 2/22 and Division 1 and 2, for communicating and working in hazardous areas.
Heating jackets
riscaldamento
riscaldamento-camicie-riscaldanti
Flexible heating jackets for drums, IBCs, gas cylinders and surfaces, for safe areas and ATEX/IECEx.
Hammers, sledgehammers and chisels
utensili
utensili-martelli-scalpelli
Non-sparking hammers, sledgehammers and chisels
Non-sparking hammers, club hammers, sledgehammers, hatchets, nail pullers, chisels, wedges, awls, punches and pin punches.
Channels, brackets and fixings
supporti-passerelle
supporti-profilati-staffaggi
Strut channels, pipe trapezes, suspension systems, anchors, fixings and cable hooks.
Solenoid valves
automazione-valvole
automazione-valvole-elettrovalvole
Solenoid valve with NAMUR interface
Monostable and bistable pilot solenoid valves with NAMUR interface or in-line ports for pneumatic actuators, in aluminium or stainless steel, also Ex ia, Ex ec and Ex db.
Cable glands for armoured cable
cablaggio
cablaggio-pressacavi-cavo-armato
Pepperl+Fuchs metal and barrier cable glands for armoured cables, in nickel-plated brass or stainless steel, for Ex d, Ex e and Ex t enclosures.
Signal and power connectors
connessione
connessione-segnale-potenza
CEAG eXLink Ex connectors for signal and power, and pre-wired terminal boxes fitted with eXLink, for connection under load in Zone 1/21.
Operator panels
display-e-hmi
display-pannelli-operatore
Operator panels
BEKA and Pepperl+Fuchs panel-mount operator panels, intrinsically safe or for Zone 2/22, for process control and monitoring in hazardous areas.
Bulkheads
illuminazione
illuminazione-bulkhead
CEAG and Dialight LED bulkhead and wall luminaires for Zone 1/21 and 2/22 hazardous areas and for non-classified industrial sites, including North America.
Motor starter switches
interruttori
interruttori-avviamento-motori
CEAG and Pepperl+Fuchs manual and direct-on-line Ex motor starters, with Ex d isolators in enclosures, for motor control in Zones 1, 2, 21 and 22.
Drums, IBCs and metal objects
messa-a-terra
messa-a-terra-fusti-ibc
Serial to Bluetooth adaptors
networking
networking-adattatore-seriale-bluetooth
RS232 and RS485/422 serial-to-Bluetooth adapters in Ex d enclosures for Zone 1/21, giving access to serial ports without opening the enclosure.
Components and elements
quadri-elettrici
quadri-componenti-elementi
Internal components for Ex d panels and enclosures, plus Pepperl+Fuchs PS1000 DIN-rail power supplies, including Zone 2 versions, for hazardous-area panels.
Portable gas leak detection
rilevatori-di-gas
rilevatori-fughe-gas-portatile
Portable instruments for detecting and locating gas leaks during inspection and maintenance work in industrial plants and hazardous areas.
Speakers
segnalazione
segnalazione-speaker
MEDC loudspeakers in Ex de versions, including ceiling-mounted models, for broadcasting messages and audible signals in industrial plants and hazardous areas.
Magnetic sensors
sensori
sensori-magnetici
Pepperl+Fuchs magnetic field sensors that detect magnets through non-magnetic walls, with NAMUR ATEX/IECEx versions for hazardous areas.
Remote I/O
sicurezza-intrinseca
sicurezza-remote-io
Pepperl+Fuchs LB and FB Remote I/O systems for Zone 2 or Zone 1, with I/O modules, field units and fieldbus communication to the control system.
PTZ cameras
sorveglianza
sorveglianza-ptz
Certified PTZ cameras for hazardous areas, with pan, tilt and zoom, for video surveillance of industrial plants and sites at risk of explosion.
Push-button and local control stations
custodie
custodie-pulsantiere-stazioni-comando
Ex e and Ex d local control stations in GRP, polyamide, aluminium and stainless steel.
Level
strumenti-di-misura
strumenti-livello
WIKA level measurement instruments: magnetic indicators, transmitters, switches, external chambers and accessories, including ATEX and IECEx certified versions.
Tablets
telecomunicazione
telecomunicazione-tablet
Pepperl+Fuchs and ecom instruments tablets and terminals, including tablets for Zone 2/22 and Division 2 and industrial kiosk terminals for safe areas.
Temperature control
riscaldamento
riscaldamento-controllo-temperatura
Controllers and power regulators for drum and container heaters, including ATEX versions.
Spanners and wrenches
utensili
utensili-chiavi
Non-sparking spanners and wrenches
Non-sparking open-end, combination, ring, slogging and adjustable spanners, sockets and accessories, hexagon keys, hook spanners, pipe wrenches and valve wheel wrenches.
Pipe supports and seismic bracing
supporti-passerelle
supporti-tubazioni-antisismica
Pipe hangers and clamps, seismic bracing, TOLCO fire-protection supports and anti-vibration supports.
Pneumatic accessories
automazione-valvole
automazione-valvole-accessori-pneumatici
Sintered brass and polycarbonate silencers
NAMUR throttle plates, quick exhaust blocks, silencers, flow regulators and check valves to complete the pneumatic circuit of actuators.
North American cable glands
cablaggio
cablaggio-pressacavi-nord-americani
Eaton cable glands for installations built to North American standards, for connecting cables to enclosures and equipment in hazardous areas.
Multi-pin connectors
connessione
connessione-multipin
Eaton multipin connectors for connecting cables and electrical equipment in potentially explosive atmospheres and in industrial settings.
Displays and indicators
display-e-hmi
display-indicatori
Displays and indicators for showing process values and signals in the field, for installation in hazardous areas and in industrial settings.
Floodlights
illuminazione
illuminazione-floodlight
Qlight and CEAG LED floodlights and work lights for Zone 2/22 and industrial use, for lighting outdoor areas, plants and machinery.
Lighting switches
interruttori
interruttori-luce
CEAG Ex 16 A light switches, changeover switches, push-buttons and photocell switches for controlling lighting in Zone 1/21.
Panel-mount and OEM
messa-a-terra
messa-a-terra-interno-quadro-oem
Intrinsic safety barriers for antennas
networking
networking-barriere-si-antenne
Intrinsically safe RF barriers, including multi-channel versions and units built into Ex d boxes, for connecting antennas in classified areas.
Ex d panels and enclosures
quadri-elettrici
quadri-custodie-ex-d
Ex d flameproof panels and enclosures certified to ATEX and IECEx, including custom configurations, for electrical installations in hazardous areas.
Fixed gas leak detection
rilevatori-di-gas
rilevatori-fughe-gas-fisso
Fixed gas leak detection systems for the continuous surveillance of industrial plants and hazardous areas at risk of explosive atmospheres.
Combined units
segnalazione
segnalazione-unita-combinate
Explosion-proof combined LED beacon and sounder
Qlight explosion-proof combined units pairing a multifunction LED beacon with an electronic horn for visual and audible signalling in hazardous areas.
Ultrasonic sensors
sensori
sensori-ultrasuoni
Pepperl+Fuchs ultrasonic sensors for object detection, double-sheet, label and splice detection, and safety applications in industrial automation.
Fieldbus
sicurezza-intrinseca
sicurezza-fieldbus
Pepperl+Fuchs FieldConnex junction boxes for FOUNDATION Fieldbus H1 and PROFIBUS PA, with Segment Protectors and I/O modules, for Zone 1 and Zone 2.
Combined PTZ cameras
sorveglianza
sorveglianza-ptz-combinate
Certified combined PTZ cameras for hazardous areas: pan-tilt units with zoom for video surveillance of industrial plants and sites at risk of explosion.
Panel-mount operators
custodie
custodie-operatori-pannello
Push-buttons, selector switches, indicator lights and components for building Ex control stations and panels.
Force
strumenti-di-misura
strumenti-forza
Load cells and force transducers in Ex versions for force measurement and weighing in industrial plants and hazardous areas.
Fixed telephones
telecomunicazione
telecomunicazione-telefoni-fissi
Fixed telephones for industrial plants, ships and offshore sites, including IMCOS automatic and sound-powered telephones, also in ATEX versions for Zone 1.
Insulation and covers
riscaldamento
riscaldamento-isolamento-coperture
Insulating jackets, insulated lids and rain covers for drums, IBCs and gas cylinders.
Cutting and scraping tools
utensili
utensili-taglio-raschiatura
Non-sparking cutting and scraping tools
Non-sparking scissors, tin snips, bolt cutters, pipe cutters, knives, files, hacksaw frames, scrapers and putty knives.
Rooftop supports and gratings
supporti-passerelle
supporti-tetto-grigliati
Non-penetrating Dura-Blok bases for flat roofs and anti-slip gratings for walkways and stairs.
Mounting kits
automazione-valvole
automazione-valvole-kit-montaggio
Mounting kit for manually operated valves
Kits for fitting limit switch boxes and sensors to manual valves and linear actuators, or in an open configuration with cylindrical sensors or mechanical switches.
Adaptors
cablaggio
cablaggio-adattatori
Pepperl+Fuchs and Eaton metric/NPT thread adaptors, reducers and enlargers for cable glands and Ex d and Ex e enclosure entries in hazardous areas.
Zone 2/22 connectors
connessione
connessione-zona-2-22
Connectors for use in Zone 2 and Zone 22, for signal and power connections in potentially explosive gas and dust atmospheres.
Street lights
illuminazione
illuminazione-stradali
Dialight LED area and street lights for yards and walkways, in versions for non-classified industrial sites and for Class I Div 2 areas (UL/CSA).
Ethernet intrinsic safety barriers
networking
networking-barriere-si-ethernet
Ex d/Ex ia Ethernet barriers for mounting on enclosures in classified areas or in the safe area, with hot-pluggable M12 connectors.
EJB panels and enclosures
quadri-elettrici
quadri-custodie-ejb
Eaton CEAG EJB Ex d IIB flameproof aluminium enclosures, supplied empty, with windows, handles and push-buttons for building panels for Zones 1, 2, 21 and 22.
Valve leak detection
rilevatori-di-gas
rilevatori-fughe-valvole
Valve leak detection solutions for identifying gas leaks on process valves in industrial plants and hazardous areas.
Intrinsic safety
segnalazione
segnalazione-sicurezza-intrinseca
MEDC intrinsically safe Ex ia visual and audible signals, such as beacons and sounders powered via a barrier, for use in Zones 0, 1 and 2.
Encoders
sensori
sensori-encoder
Pepperl+Fuchs incremental, absolute and draw-wire encoders for position and distance measurement, with ATEX/IECEx-certified versions for hazardous areas.
Thermal PTZ cameras
sorveglianza
sorveglianza-ptz-termiche
Certified thermal PTZ cameras for hazardous areas, combining pan-tilt movement and thermal imaging for surveillance of plants and sites at risk of explosion.
Custom and 72h Express
custodie
custom-express-72h
Junction boxes and control stations assembled by Maffioletti to customer specification, also with our 72-hour Express service.
Flow
strumenti-di-misura
strumenti-portata
WIKA flow measurement instruments, including ultrasonic gas flow meters and air flow sensors for ventilation and air-conditioning systems.
Miscellaneous tools
utensili
utensili-vari
Non-sparking miscellaneous tools
Non-sparking brushes, funnels, pry bars, picks, shovels, spades and tool sets in carrying case.
Readers and Scanners
telecomunicazione
telecomunicazione-lettori-scanner
1D/2D barcode readers, wireless and corded, and RFID readers for hazardous areas and industrial environments.
Testers and verification instruments
messa-a-terra
messa-a-terra-tester-verifica
Newson Gale Sole-Mate II footwear test station
Testers for antistatic footwear and clamps for checking the electrical continuity of flexible hoses before product transfer.
Keyboards and Peripherals
display-e-hmi
display-tastiere-periferiche
Industrial keyboards with integrated mouse and peripherals for operator stations in hazardous areas and industrial environments.
Surge protection
sicurezza-intrinseca
sicurezza-protezione-sovratensioni
Pepperl+Fuchs surge protection for instrumentation loops and fieldbus networks, mounted in the field on the instrument, on DIN rail or on K-System modules.
Ex p purge and pressurisation systems
custodie
custodie-pressurizzazione-ex-p
Pepperl+Fuchs Bebco EPS purge and pressurisation systems for Ex p enclosures in hazardous areas such as Zone 2/22, and for industrial environments.
ISO brackets, couplings and reducers
automazione-valvole
automazione-valvole-giunti-adattatori
ISO 5211 steel mounting brackets
ISO 5211 mounting brackets, blank couplings with external square and square reducers to connect the pneumatic actuator to any valve.
Stopping plugs and accessories
cablaggio
cablaggio-tappi-accessori
Pepperl+Fuchs stopping plugs, locknuts, washers, shrouds and breathers for cable glands and cable entries on Ex d, Ex e and Ex t enclosures.
Portable lights
illuminazione
illuminazione-portatili
CEAG portable Ex lamps: hand lamps, machine lights, temporary lighting and tank inspection lamps, for use in Zone 1/21 and 2/22 hazardous areas.
Antennas
networking
networking-antenne
Antennas, antenna feedthroughs and coaxial extension cables for connecting radios and RF barriers to remote antennas, in hazardous and industrial areas.
Signal towers
segnalazione
segnalazione-torrette
Qlight modular LED signal towers with buzzer, in versions for Zone 2 and Class I Div 2, for status signalling on machines and plants.
Portable instruments
strumenti-di-misura
strumenti-portatili
ecom instruments intrinsically safe Ex ia tools and devices for Zone 1, such as magnetic field probes and wall clocks, for use in hazardous areas.
Photoelectric Sensors
sensori
sensori-fotoelettrici
Thru-beam, retroreflective and diffuse mode sensors, light grids, slot sensors, contrast, colour and fibre optic sensors.
Cameras
telecomunicazione
telecomunicazione-fotocamere
Intrinsically safe cameras for documenting inspections and maintenance in classified areas.
Ethernet-APL
sicurezza-intrinseca
sicurezza-ethernet-apl
Pepperl+Fuchs Ethernet-APL field switches for installation in Zone 2, with Ex ic or Ex ia spur ports for connecting field instruments to the Ethernet network.
PA/GA and sound systems
telecomunicazione
telecomunicazione-pa-ga
IMCOS PA/GA systems for public address and general alarm on board: SOLAS audio-visual columns and panels, microphones, volume controls and controllers.
VDI/VDE 3845 brackets and accessories
automazione-valvole
automazione-valvole-staffe-vdi-vde
Adjustable VDI/VDE 3845 stainless steel brackets
Adjustable and one-piece VDI/VDE 3845 brackets for limit switch boxes and positioners, solenoid valve plates, shaft feedthroughs, extensions and visual position indicators.
Sensor and actuator cordsets
connessione
connessione-cavi-sensori-attuatori
Pre-wired M8 and M12 cordsets for sensors and actuators, single-ended or double-ended, in PUR, PVC and welding-resistant jackets, including blue NAMUR ATEX/IECEx versions.
Intrinsic safety cables
cablaggio
cablaggio-cavi-sicurezza-intrinseca
Cables for intrinsically safe (Ex i) circuits, used to connect instrumentation and equipment installed in hazardous areas.
Tower obstruction lights
illuminazione
illuminazione-segnalazione-torri
Qlight and FHF LED aircraft obstruction lights, including flameproof versions, for towers, stacks and tall structures at plants with hazardous areas.
Humidity and temperature transmitters
strumenti-di-misura
strumenti-umidita-temperatura
Humidity and temperature transmitters in Ex versions for monitoring relative humidity and temperature in industrial plants and hazardous areas.
Distance and LiDAR Sensors
sensori
sensori-distanza-lidar
Optical distance sensors and 2-D and 3-D LiDAR scanners for measurement, positioning and collision avoidance.
Audio and push-to-talk
telecomunicazione
telecomunicazione-audio-ptt
Speaker microphones, headsets and push-to-talk solutions certified for hazardous areas.
Radio modems and telemetry
networking
networking-radiomodem-telemetria
Intrinsically safe LoRaWAN I/O nodes, radio modems and Ex d power supplies for wireless telemetry of field signals in hazardous areas.
Signal conditioners
sicurezza-intrinseca
sicurezza-condizionatori-segnale
Pepperl+Fuchs SC-System and K-System signal conditioners for non-Ex i circuits: isolators, switch amplifiers, converters and solenoid valve drivers.
Manual call points
segnalazione
segnalazione-pulsanti-allarme
MEDC lever and push-button manual alarm call points in Ex d and Ex ia versions, for manually triggering alarms in hazardous areas.
Telephone accessories
telecomunicazione
telecomunicazione-accessori-telefonici
FHF accessories and spare parts for telephones and signals: handsets for Ex and weatherproof telephones, domes, protective grilles, brackets and arresters.
Field-attachable connectors
connessione
connessione-connettori-da-campo
M8, M12, 7/8", 1/2", M23 and RJ45 connectors for field assembly, male or female, straight or angled, with screw, IDC or solder termination.
Armoured cables
cablaggio
cablaggio-cavi-armati
Armoured cables for wiring electrical installations in hazardous areas and industrial settings, where the cabling needs mechanical protection.
Recessed luminaires
illuminazione
illuminazione-incasso
CEAG and Raytec recessed LED ceiling luminaires for Zone 1/21 and 2/22 and for non-classified industrial areas, also with emergency versions.
RFID and Code Identification
sensori
sensori-identificazione
LF, HF and UHF RFID systems, control interfaces, tags, stationary and handheld barcode and 2-D code readers.
HART interfaces
sicurezza-intrinseca
sicurezza-interfacce-hart
Pepperl+Fuchs HART interfaces, including USB, RS-232 and Bluetooth modems and multiplexers, for commissioning, diagnostics and asset management.
Status lights
segnalazione
segnalazione-lampade-di-stato
MEDC multi-way status lamps in Ex e and Ex d versions, with LED, xenon or filament sources, for visual signalling in Zones 1, 2, 21 and 22.
Valve connectors
connessione
connessione-connettori-elettrovalvole
DIN EN 175301-803 form A, B and C valve connectors, pre-wired or field-attachable, with Z-diode, varistor, LED or IO-Link.
Screened cables
cablaggio
cablaggio-cavi-schermati
Screened cables for wiring power and signal circuits in hazardous areas and industrial settings, where protection against interference is needed.
Emergency lighting
illuminazione
illuminazione-emergenza
Qlight and CEAG LED emergency, safety and exit sign luminaires, flameproof and with built-in battery, for Zone 1/21 hazardous areas.
Vision Sensors
sensori
sensori-visione
Vision sensors, industrial cameras and light section sensors for inspection, quality control and measurement.
Terminals and system accessories
sicurezza-intrinseca
sicurezza-morsetti-accessori
Pepperl+Fuchs MFT Ex d e multifunction terminals for Zone 1 and K-System accessories, such as Power Rail, power supply modules and terminal blocks for DIN rail.
Heat detectors
segnalazione
segnalazione-rilevatori-calore
MEDC HD1 heat detectors in Ex d, Ex e and Ex ia versions, with alarm thresholds from 60 to 385 °C, for fire detection in hazardous areas.
Passive splitters
connessione
connessione-ripartitori-passivi
M8 and M12 passive splitters with 4, 6 and 8 slots and AS-Interface junction modules for flat cable, in fully encapsulated housings.
Conduits and fittings
cablaggio
cablaggio-guaine-raccordi
Metal, polyamide and PVC flexible conduits with matching fittings for cable protection.
Positioning Systems
sensori
sensori-posizionamento
Inductive and optical positioning systems for overhead cranes, stacker cranes, AGVs and conveyor systems.
Y and T splitters
connessione
connessione-ripartitori-y-t
M8 and M12 Y-cables and Y or T adapters to connect two sensors or actuators to a single port and to loop through bus signals.
Inclination and Acceleration Sensors
sensori
sensori-inclinazione
Single- and dual-axis inclinometers, acceleration sensors and inertial measurement units for mobile machinery and plants.
Panel receptacles
connessione
connessione-connettori-pannello
M8, M12, 7/8" and 1/2" male and female panel receptacles for front or rear mounting on housings and cabinets, with single wires or an inner connector.
Vibration Sensors
sensori
sensori-vibrazione
Vibration sensors for condition monitoring of motors, pumps and fans, also with IO-Link and SIL 2.
Bulk raw cable
connessione
connessione-cavo-grezzo
Bulk raw cable on reels for sensors and actuators, spiral cables and AS-Interface flat cable, to be combined with field-attachable connectors.
Filter
+
Product Certification

Floodlights

Back
Raytec SPARTAN High Power Flood HPFL Zone 1, front view
SPARTAN & WARRIOR High Power Flood – High-power Ex LED floodlight
Raytec HPFL LED floodlight up to 34,500 lm (SPARTAN Ex) and 45,000 lm (WARRIOR industrial) for large-area lighting: Zone 1/21, Zone 21 and Zone 2/22 ATEX/IECEx and a heavy-industry version.
illuminazione-floodlight
illuminazione
raytec-spartan-high-power-flood
# General Product type: High-power LED floodlight for hazardous areas (SPARTAN) and industrial environments (WARRIOR) Versions: SPARTAN Zone 1/21 (SPX) · SPARTAN Zone 21 dust (SPZ-…-Z21) · SPARTAN Zone 2/22 (SPZ) · WARRIOR industrial (SPI) Models: HPFL100 167 W · HPFL200 200 W · HPFL300 240 W · HPFL400 290 W (WARRIOR only) # Certifications Protection concept Zone 1/21: II 2 G D · Ex eb mb IIC T4 Gb · Ex tb IIIC T99°C Db # Lighting Luminous flux: Up to 34,500 lm (Zone 1/21), 38,600 lm (Zone 2/22 and 21), 45,000 lm (WARRIOR), depending on optics Power supply: 110-277 V 50/60 Hz AC (SPARTAN) · 150-264 V AC/DC (WARRIOR) Dimming: Optional DALI 2.0 (-DA), standard on WARRIOR LED: 384 Platinum Elite SMT LEDs, 6500 K, CRI 80+ # Mechanical Construction: Marine-grade aluminium with CX Shield coating, marine-grade stainless steel fixings and brackets Weight: 18.5 kg Cable entries: 2 × M20 as standard, others on request Mounting: Adjustable U-bracket # Environmental Ingress protection: IP66/IP67, IK09 Ambient temperature: -40 °C to +70 °C (HPFL100), +65 °C (HPFL200), +60 °C (HPFL300)
industriale
atex
iecex
ce
abs
dali-2
class-i-div-2
Raytec SPARTAN Mid Power Flood MPFL Zone 1
SPARTAN & WARRIOR Mid Power Flood – Ex LED floodlight from 5,000 to 20,000 lm
Raytec MPFL LED floodlight from 5,000 to 20,000 lm in two families: SPARTAN for hazardous areas (Zone 1/21, Zone 2/22 ATEX/IECEx and Class I Div 2) and WARRIOR for heavy industry; versions with 90 min or 3 h emergency.
illuminazione-floodlight
illuminazione
raytec-spartan-mid-power-flood
# General Product type: Mid-power LED floodlight for hazardous areas (SPARTAN) and industrial environments (WARRIOR) Versions: SPARTAN Zone 1/21 (SPX) · SPARTAN Zone 2/22 (SPZ) · SPARTAN Class I Div 2 (CID2) · WARRIOR industrial (SPI) # Certifications Protection concept Zone 1/21: Certificates CML 21ATEX3317 and IECEx CML 21.0037 # Lighting Luminous flux: From 5,000 to 20,000 lm nominal (see the flux-per-optic table in the datasheet) Emergency: Intelligent self-test emergency 90 min (EMX90) or 3 h (EMX180) LED: 192 Platinum Elite SMT LEDs, 6500 K, CRI 80+ # Electrical Power supply: 110-277 V 50/60 Hz AC Power: 50 W (5K) · 60 W (7.5K) · 80 W (10K) · 100 W (12.5K) · 120 W (15K) # Mechanical Construction: Powder-coated marine-grade aluminium, toughened glass, marine-grade stainless steel fixings Weight: 13.2 kg (16 kg emergency version) Cable entries: 2 × M20 as standard, others on request # Environmental Ingress protection: IP66 & IP67 Ambient temperature: -40 °C to +60 °C (-20 °C to +50 °C emergency versions)
industriale
atex
iecex
ukca
ce
abs
met
ul
class-i-div-2
Raytec SPARTAN Flood FL48 Ex LED floodlight
SPARTAN & WARRIOR Flood FL and BL24 – Ex and industrial LED floodlight
Raytec FL48 (up to 18,600 lm), FL24 (up to 9,300 lm) LED floodlights and Bulkhead Flood BL24 on U-bracket: SPARTAN for Zone 1/21, Zone 2/22 ATEX/IECEx and Class I Div 2, WARRIOR for heavy industry.
illuminazione-floodlight
illuminazione
raytec-spartan-flood
# General Product type: LED floodlight for hazardous areas (SPARTAN) and industrial environments (WARRIOR) Versions: SPARTAN Zone 1/21 (SPX) · SPARTAN Zone 2/22 (SPZ) · SPARTAN Class I Div 2 (CID2) · WARRIOR industrial (SPI) Models: FL48 (48 LEDs) · FL24 (24 LEDs) · BL24 Bulkhead Flood Standard and High Output on U-bracket (SB30) # Lighting Luminous flux: FL48 16,900 lm (Zone 1/21) or 18,600 lm · FL24 8,450 lm (Zone 1/21) or 9,300 lm · BL24 2,500 lm, HO 4,230 lm (Zone 1/21) or 4,650 lm Emergency: FL48 25% (EM25) · FL24 50% (EM50), up to 90 min · BL24 25% (EMX25), up to 3 h Colour temperature: 6000 K+ (FL) · 6500 K (BL24), CRI 80+ # Electrical Power supply: FL 110-254 V 50/60 Hz AC, 18-48 V AC / 18-69 V DC and 12 V AC/DC options · BL24 110-254 V AC/DC, 110-277 V option Power: FL24 68 W (71 W emergency) · FL48 136 W (139 W emergency) # Mechanical Ingress protection: IP66 & IP67 Construction: Epoxy powder-coated marine-grade aluminium, toughened glass, marine-grade stainless steel fixings and brackets Weight: FL24 8-10 kg · FL48 16-20 kg · BL24 5-6 kg Mounting: U-bracket with locking screw Cable entries: M20 as standard, others on request
industriale
atex
ukca
iecex
ce
abs
met
dali-2
class-i-div-2
Raytec SPARTAN Crane Flood FL48C Zone 1
SPARTAN & WARRIOR Crane Flood – Ex and industrial LED crane floodlight
Vibration-resistant Raytec FL48C LED floodlight for cranes, overhead cranes and loading arms: SPARTAN for Zone 1/21, Zone 2/22 ATEX/IECEx and Class I Div 2, WARRIOR for port and industrial cranes.
illuminazione-floodlight
illuminazione
raytec-spartan-crane-flood
# General Product type: LED crane floodlight for hazardous areas (SPARTAN) and industrial environments (WARRIOR) Versions: SPARTAN Zone 1/21 (SPX) · SPARTAN Zone 2/22 (SPZ) · SPARTAN Class I Div 2 (CID2) · WARRIOR industrial (SPI) # Lighting Circular optics: 10°×10°, 30°×30°, 50°×50°, 80°×80°, 120°×120° Elliptical optics: 35°×10°, 60°×25°, 80°×30°, 120°×50° Colour temperature: 6000 K+, CRI 80+ # Electrical Power supply: 110-254 V 50/60 Hz AC; low-voltage option 18-48 V AC / 18-69 V DC (-LV) Power: 136 W # Mechanical Construction: Epoxy powder-coated marine-grade aluminium, toughened glass, marine-grade stainless steel fixings and brackets Weight: 25 kg Mounting: 3 M12 bolts (not supplied), 2 anchor points for safety wire
industriale
atex
ukca
iecex
abs
class-i-div-2
Dialight SafeSite Floodlight
SafeSite Floodlight – Ex LED floodlight for Zone 1/21
Dialight SafeSite LED floodlight from 10,950 to 25,900 lm, ATEX/IECEx certified for Zone 1/21, with 316 stainless steel bracket included, IIB+H2 hydrogen versions, 4000 K or 5000 K and 0-10 V or DALI dimming.
illuminazione-floodlight
illuminazione
dialight-safesite-floodlight
# Europe version (CE / ATEX) Product type: LED floodlight for hazardous areas Luminous flux: Standard IIB 10,950 - 25,900 lm · Hydrogen IIB+H2 up to 23,500 lm (FLH) / 25,900 lm (FSH) Power: 80 - 212 W depending on version Efficacy: Up to 143 lm/W Power supply: 100-277 VAC, 120-250 VDC (Hydrogen FLH 110-277 VAC) Colour temperature: 5000 K and 4000 K, CRI 80 Optics: Narrow, medium, wide, NEMA 7x6 Dimming: 0-10 V · DALI 2.0 (FSA) Diffuser: Tempered glass, also with anti-shatter film Connection: Factory-fitted junction box, 2 x M20x1.5 or 2 x M25x1.5 Zones: Zone 1, 2, 21, 22 Marking: Ex II 2 GD Ex db eb IIB T5 Gb / Ex tb IIIC T100°C Db · Hydrogen FLH Ex d e IIB+H2 T4 Gb · Hydrogen FSH Ex db eb IIB+H2 T5 Gb Certificates: Sira 18ATEX1001X · IECEx SIR 18.0001X · Baseefa 12ATEX0070X · IECEx BAS 12.0044X Ambient temperature: from -40 °C to +60 °C Ingress protection: IP66 Mounting: 316 stainless steel bracket included, also with safety retention tabs Dimensions: 429 x 453 x 281 mm Weight: 15.4 kg # North America version (UL/CSA) Market: North America (UL/CSA) Series: FLD (legacy codes FLD…N/S…, new codes FLD7…/FLD4…) Classification: Class I Div 2 Groups A, B, C, D · Class II Div 1 Groups E, F, G · Class II Div 2 Groups F, G · Class III (models with yoke bracket and glass); slipfitter models and models with polycarbonate diffuser Class I Div 2 only Temperature class: T4A from -40 °C to +65 °C (13,500-15,000 lm) · T5 from -40 °C to +65 °C (10,750-11,500 lm) Standards: UL 844, CSA C22.2 No. 137 · DLC Luminous flux: From 9,500 to 15,000 lm Power: 106 · 112 · 135 · 140 W Efficacy: Up to 111 lm/W Power supply: 100-277 VAC 50/60 Hz or 347-480 VAC 50/60 Hz Colour temperature: 5000 K (4000 K on request), CRI 75 Optics: NEMA 2 (23°), NEMA 4 (52°), NEMA 5 (93°), NEMA 6 (115°), NEMA 7x6 (140° x 115°), NEMA 6x7 (115° x 140°) Diffuser: Tempered glass (IK07) or polycarbonate (IK10) Connection: 2 x 3/4" NPT cable entries (models with yoke bracket), isolated wiring compartment Ingress protection: IP66/67, NEMA 4X Ambient temperature: from -40 °C to +65 °C Mounting: 304 stainless steel yoke bracket (standard) or integral slipfitter for 2" pole (60.3 mm OD) Weight: 13.6 kg Effective projected area (EPA): 0.15 m² (1.66 ft²) Lifetime: L70 > 100,000 h at 25 °C · 10-year warranty
atex
iecex
ce
ul
csa
class-i-div-2
class-ii-div-1
class-ii-div-2
nec-cec
dlc
abs
Dialight ProSite Floodlight
ProSite Floodlight – LED floodlight Ex Zone 2/21/22 and industrial
Dialight ProSite LED floodlight, ATEX/IECEx certified for Zone 2/21/22 (F1B, 12,000-30,000 lm) and in a CE/ENEC industrial version up to 60,000 lm (F1E/F2E), with wide, medium and asymmetric optics, four colour temperatures and angled, straight, slipfitter or Heavy-Duty brackets.
illuminazione-floodlight
illuminazione
dialight-prosite-floodlight
Product type: LED floodlight for Zone 2/21/22 hazardous areas and non-classified industrial areas Luminous flux: 12,000 · 18,000 · 30,000 lm (F1, nominal classes) · 60,000 lm (F2, industrial only) Power: 81 · 124 · 234 W (F1) · 484 W / 499 W at 347-480 VAC (F2) Power supply: 120-277 VAC, 120-250 VDC · industrial version also 347-415-480 VAC Colour temperature: 5000 K and 4000 K (CRI 70) · 2700 K (CRI 80) · 2200 K Optics: Wide 125° (NEMA 6), medium 56° (NEMA 4), asymmetric Diffuser: Glass (Ex and industrial) · integrated PC optic (industrial only) Dimming: DALI 1 / DALI 2, 0-10 VDC Brackets: Angled 316 stainless steel (standard), straight 316 stainless steel, pole slipfitter (F1 only), anti-vibration 316 stainless steel Heavy-Duty Cable entries: 2 x M25 Zones: Zone 2, 21, 22 (Ex version F1B) · safe area (industrial version F1E/F2E) Marking: Ex ec IIC T4 Gc / Ex tb IIIC T125°C Db (Ex version) Certificates: ETL25ATEX0528X · ETL25ATEX0529X · IECEx ETL 22.0001X · industrial version CE / ENEC · DNV TAE00004GM Ambient temperature: -40 °C to +65 °C (F2 60,000 lm: up to +55 °C) Ingress protection: IP66/67 Impact resistance: IK08 (glass) · IK10 (integrated PC optic) Weight: F1 10.9 - 13.6 kg · F2 19.5 - 24.5 kg Market: North America (UL/CSA) Versions: F1 and F2 non-classified (UL 1598/A, codes F1U/F2U) · F1 and F2 for hazardous locations (UL 844, codes F1D/F2D and F1F/F2F) Classification: F_D: Class I Div 2 Groups A, B, C, D · Class I Zone 2 Group IIC · Class II Div 2 Groups F, G · Zone 20, 21, 22 · Class III; F_F: additionally Class II Div 1 Groups E, F, G (F1 up to 18,000 lm, F2 up to 36,000 lm) Temperature class: T4 with Ta from -40 °C to +65 °C · T4A with Ta from -40 °C to +55 °C Area: safe (non-classified) for UL 1598/A versions (F1U/F2U) Certifications: UL 1598/A, CSA C22.2 No. 250.0, NOM (non-classified versions) · UL 844, CSA C22.2 No. 137 (hazardous location versions) · ABS · DLC/DLC Premium for some models; Intertek (ETL) certification Luminous flux: F1 12,000 - 31,600 lm · F2 30,200 - 65,000 lm Power: F1 81 - 237 W · F2 200 - 499 W Efficacy: Up to 163 lm/W Power supply: 120-277 VAC / 120-250 VDC · 277-480 VAC Colour temperature: 5000 K, 4000 K (CRI 70) · 2700 K (CRI 80) · 2200 K · amber (non-classified only) Optics: NEMA 4, NEMA 6, NEMA 7x6, asymmetric, wide asymmetric Dimming: DALI 2.0, 0-10 VDC · optional Dialight IntelliLED wireless (non-classified only) Surge protection: 6 kV line-line and line-earth · optional 10 kA / 20 kA module Cable entries: 2 x 3/4" NPT Ambient temperature: -40 °C to +65 °C (F2 60,000 lm: up to +55 °C) Ingress protection: IP66/67, NEMA 4X Impact resistance: IK10 (PC optic and PC lens) · IK08 (glass) Lifetime: L70 > 150,000 h at 25 °C Body: A360 die-cast aluminium, 316 stainless steel screws, dual epoxy and polyester coating Effective projected area (EPA): F1 0.19 m² (2.00 sq ft) · F2 0.31 m² (3.33 sq ft) Weight: F1 11.0 - 18.3 kg · F2 19.4 - 27.3 kg Warranty: 10 years
industriale
atex
iecex
ce
enec
dnv
ul
csa
etl
class-i-div-2
class-ii-div-1
class-ii-div-2
nec-cec
dlc
abs
Atexor SLAM Star Ex portable floodlight
SLAM Star – Ex portable LED floodlight
Atexor SLAM Star 5400 lm portable LED floodlight for ATEX Zone 1: three independent LED units, 25° adjustable tilt, can be moved while switched on, IP66, versions with 1 or 2 Ex sockets.
illuminazione-floodlight
illuminazione-portatili
illuminazione
atexor-slam-star
Product type: Portable LED floodlight for hazardous areas Ex marking: II 2G Ex eb mb op is IIC T4 Gb Certificate: ATEX EESF 18 ATEX 045 Luminous flux: 5412 lm measured (approx. 7400 lm at source) Power: < 90 W Power supply: 100-250 V AC/DC or 20-50 V AC/DC, 0/50/60 Hz Colour rendering: CRI > 80 Ingress protection: IP66 Ambient temperature: -20 °C to +40 °C Adjustment: continuous 25° tilt Materials: Dissipative PC and PA6, double shell Dimensions: 412 × 356 × 492 mm Weight: 10.5 kg
Zone 1 ATEX 5412 lm, < 90 W 3 independent LED units Can be moved while on IP66
atex
ce
ProSite Floodlight Battery Backup Dialight
ProSite Floodlight Battery Backup – Industrial LED floodlight with integrated emergency
Dialight ProSite LED floodlight from 12,000 to 30,000 lm with integrated emergency battery up to 180 minutes and self-test, for non-classified industrial areas, with PC or glass optics, four colour temperatures and 316 stainless steel brackets.
illuminazione-floodlight
illuminazione
dialight-prosite-floodlight-battery-backup
Product type: Industrial LED floodlight with integrated emergency battery Luminous flux: 12,000 · 18,000 · 30,000 lm (nominal classes) · in emergency mode 1,720 lm (PC optic) / 1,600 lm (glass) Power: 87 · 130 · 240 W Power supply: 230-240 VAC, 50/60 Hz Colour temperature: 5000 K and 4000 K (CRI 70) · 2700 K (CRI 80) · 2200 K Optics: Wide 125°, medium 56°, asymmetric Diffuser: Integrated PC optic or glass Dimming: DALI 1 / DALI 2, 0-10 VDC Emergency: Integrated 10 W NiMH battery, selectable 60/90/180 min autonomy, automatic self-test Brackets: Angled 316 stainless steel (standard), straight 316 stainless steel, pole slipfitter, 316 stainless steel Heavy-Duty Cable entries: 2 x M25 Area: safe (non-classified) Certifications: CE / ENEC · ATEX/IECEx Zone 2/21/22 version undergoing certification Ambient temperature: -20 °C to +55 °C Ingress protection: IP66/67 Impact resistance: IK10 (integrated PC optic) · IK08 (glass) Weight: 13 - 16 kg Market: North America (UL/CSA) Versions: F1U non-classified (UL 1598/A, UL 924) · F1D for hazardous locations (UL 844) Classification: F1D: Class I Div 2 Groups A, B, C, D · Class I Zone 2 Group IIC · Class II Div 2 Groups F, G · Zone 20, 21, 22 · Class III (Class II Div 1 Groups E, F, G with 'F' certification up to 18,000 lm) Area: safe (non-classified) for UL 1598/A versions (F1U) Certifications: UL 1598/A, CSA C22.2 No. 250, UL 924, CSA C22.2 No. 141 (F1U) · UL 844, CSA C22.2 No. 137 (F1D) Luminous flux: 12,200 - 31,600 lm Emergency flux: 1,490 - 1,720 lm Power: 87 · 130 · 181 · 240 W Efficacy: Up to 152 lm/W Power supply: 120-277 VAC, 50/60 Hz Emergency: Integrated battery, 90 min autonomy as standard (60 or 180 min field-selectable) Colour temperature: 5000 K, 4000 K (CRI 70) · 2700 K (CRI 80) · 2200 K · amber Optics: NEMA 4, NEMA 6, NEMA 7x6, asymmetric, wide asymmetric (F1U only) Dimming: DALI 1 and 2, 0-10 VDC Surge protection: 6 kV line-line and line-earth · optional 10 kA / 20 kA module Cable entries: 2 x 3/4" NPT Ambient temperature: -20 °C to +55 °C Ingress protection: NEMA 4X Impact resistance: IK10 (PC optic and PC lens) · IK08 (glass) Lifetime: L70 > 150,000 h at 25 °C Effective projected area (EPA): 0.19 m² (2.00 sq ft) Weight: 13 - 15 kg Warranty: 10 years (battery excluded)
industriale
ce
enec
ul
csa
class-i-div-2
class-ii-div-1
class-ii-div-2
nec-cec
ProSite High Mast Dialight
ProSite High Mast – Industrial LED floodlight for high masts (UL/CSA)
Dialight ProSite High Mast LED floodlight from 47,200 to 65,000 lm for high masts and high mounting heights in non-classified industrial areas in the North American market, UL 1598/A and CSA certified, with NEMA 4, 6, 7x6 and asymmetric optics and surge protection up to 10 kA.
illuminazione-floodlight
illuminazione
dialight-prosite-high-mast
Product type: Industrial LED floodlight for high masts Luminous flux: 47,200 - 65,000 lm (nominal classes 48,000 · 60,000 lm) Power: 346 · 357 · 484 · 499 W Efficacy: Up to 147 lm/W Power supply: 120-277 VAC / 120-250 VDC · 347-480 VAC Colour temperature: 5000 K (CRI 70); 4000 K and 2200 K CRI 70, 2700 K CRI 80 on request Optics: NEMA 4, NEMA 6, NEMA 7x6, asymmetric, wide asymmetric Diffuser: Integrated polycarbonate optic/lens; optional glass or polycarbonate cover Dimming: DALI 1.0 and 2.0 / 0-10 VDC Surge protection: 6 kV / 3 kA as standard; additional 10 kA module (versions 8/9) THD: < 20% Power factor: > 0.9 Cable entries: 1 x 3/4" NPS Mounting: 4-bolt arm bracket with ±5° adjustment, for pipes 42-60 mm OD (1.66"-2.375") Effective projected area (EPA): 0.14 m² (1.50 ft²) Body: A360 die-cast aluminium, 316 stainless steel screws, dual epoxy and polyester finish Certifications: UL 1598/A · CSA C22.2 · NOM · DLC / DLC Premium (selected models) Area: safe (non-classified) Market: North America (UL/CSA) Ambient temperature: -40 °C to +65 °C (-40 °F / +149 °F); 60,000 lm up to +55 °C (+131 °F) Ingress protection: IP66/67, NEMA 4X Vibration: ANSI C136.31 and CALTRANS test 611 Lifetime: L70 > 100,000 hours at 50 °C Weight: 21.3 - 26.3 kg (47-58 lb) Warranty: 10 years
industriale
ul
csa
dlc
CEAG PXLED
CEAG PXLED – Ex LED floodlight for Zone 1/21 from 5L to 30L
CEAG PXLED Ex LED floodlight for Zone 1/21 and 2/22, from 5,000 to 32,000 lm, narrow, wide and asymmetric optics, in anodised aluminium.
illuminazione-floodlight
illuminazione
ceag-pxled
# Certifications ATEX: BVS 17 ATEX E 013 X — II 2G Ex db eb op is q IIC T4 Gb · II 2D Ex tb op is IIIC T100 °C Db IECEx: IECEx BVS 17.0004 X # Electrical Voltage: 110-277 V AC / 127-270 V DC Flux/power: 5L 49 W · 10L 98 W 10,772 lm · 20L 196 W 21,544 lm · 30L 294 W 32,316 lm # Mechanical Body: copper-free anodised aluminium, toughened glass, 316L stainless steel bracket # Environmental Ingress protection: IP66/IP67 Ambient temperature: -50 °C to +55 °C
ATEX and IECEx certified for Zone 1, 2, 21 and 22 6 sizes from 5L to 30L, from approx. 5,400 to 32,300 lm Narrow, wide and asymmetric optics, 5700 K Voltage 110-277 V AC / 127-270 V DC (24-48 V version available) IP66/67, -50 °C to +55 °C Lifetime 60,000 h at 55 °C
atex
iecex
ce
CEAG HFL
CEAG HFL – Ex LED floodlight for Zone 1/21 up to 38,500 lm
HFL LED floodlight for Zone 1/21 and 2/22, from 12,500 to 37,000 lm, over 140 lm/W, also with integrated emergency and DALI-2.
illuminazione-floodlight
illuminazione
ceag-hfl
# Certifications ATEX: SGSNA25ATEX031301X · IECEx NEP 24.0045X Marking: II 2G Ex db eb mb IIC T4…T3 Gb · II 2D Ex tb IIIC T80/T85 °C Db # Electrical Voltage: 100-277 V AC · 125-300 V DC Flux/power: 12L 12,556 lm/89 W · 20L 19,319 lm/133 W · 30L 31,541 lm/220 W · 40L 37,215 lm/260 W # Environmental Ingress protection: IP66, IK10 Ambient temperature: -40 °C to +55 °C
ATEX and IECEx certified for Zone 1, 2, 21 and 22 HFL-12L, 20L, 30L and 40L, from 12,556 to 37,215 lm Efficacy over 140 lm/W EM version with 1.5 h or 3 h emergency IP66, IK10, -40 °C to +55 °C DALI-2 option, 316L stainless steel bracket
atex
iecex
ce
CEAG VMV LED and PVML LED
CEAG VMV LED and PVML LED – LED floodlights and pendant luminaires for Zone 2/21/22 and industry
Champ VMV LED lamp modules for Zone 2/21/22 and PVML for industrial use, from 3,000 to 25,000 lm, with pendant, ceiling and wall mounting modules.
illuminazione-floodlight
illuminazione-high-bay
illuminazione
ceag-vmv-pvml
# Certifications VMV: IECEx UL 13.0052X (3L-11L) · IECEx UL 14.0031X (13L-25L) Ex marking: II 3G Ex nA IIC Gc · II 2D Ex tb IIIC Db # Electrical Voltage: 100-277 V AC · 127-250 V DC # Mechanical Body: die-cast aluminium with epoxy coating, glass # Environmental Ingress protection: IP66 / Type 4X Ambient temperature: -40 °C to +65 °C
VMV: Zone 2, 21 and 22, also Class I Div 2 PVML: industrial version for non-hazardous areas 9 sizes from 3,000 to 25,000 lm, up to 127 lm/W Type I, III and V optics Optional 90 min emergency battery IP66, -40 °C to +65 °C
industriale
atex
iecex
ce
CEAG FMVA and PFMA LED
CEAG FMVA and PFMA LED – LED floodlights for Zone 2/22 and industry
Champ FMVA LED floodlights for Zone 2/22 and PFMA for industrial use, from 3,000 to 50,000 lm, in die-cast aluminium.
illuminazione-floodlight
illuminazione
ceag-fmva-pfma
# Certifications FMVA: DEMKO 15 ATEX 1377X · IECEx UL15.0029X — II 3G Ex ec mb IIC T5/T4 Gc · II 2D Ex tb IIIC T65/T80 Db # Mechanical Body: die-cast aluminium # Environmental Ingress protection: IP66 / Type 4X Ambient temperature: -40 °C to +65 °C
FMVA: Zone 2 and 22, also Class I Div 2 PFMA: industrial version for non-hazardous areas 11 sizes from 3,000 to 50,000 lm 5000 K / CRI 70 or 3000 K / CRI 80 IP66 / Type 4X, -40 °C to +65 °C Lifetime 60,000 h at 55 °C
industriale
atex
iecex
ce
CEAG mounting accessories for Ex luminaires
CEAG – Mounting accessories for Ex luminaires
CEAG accessories for Ex luminaires: brackets, suspensions, eyebolts, pole clamps, floodlight accessories and the EFS MS1 Ex d motion sensor.
illuminazione-lineari
illuminazione-floodlight
illuminazione
ceag-accessori-illuminazione
# EFS MS1 sensor Certification: LOM 03 ATEX 2034 — II 2G Ex d IIC T6 Gb · II 2D Ex t IIIC T85 °C Db Range: up to 15 m · breaking capacity 400 VA Ingress protection: IP67
Galvanised or stainless steel mounting material for CEAG luminaires Brackets and accessories for floodlights EFS MS1 Ex d motion sensor, range up to 15 m
industriale
atex
iecex
ce
Qlight QMFL300-Ex-24
Qlight QMFL300-Ex-24 – Non-sparking LED work light for Zone 2, 24 VDC
QMFL300-Ex-24 is a 290 mm anti-glare LED work light with “nR” protection for Zone 2: epoxy-sealed aluminium housing, resistant to oil, water and vibration (IP66/IP67/IP69K), tempered glass lens.
illuminazione-floodlight
illuminazione
qlight-qmfl300-ex-24
# General Product type: non-sparking LED work light for Zone 2, 24 VDC Brand: Qlight (South Korea) # Electrical Supply voltage: 24 VDC # Ex protection Marking KCs: Ex nR II T6 Marking NEPSI / CCC: Ex nR IIC T6 Gc, IP66/IP67/IP69K Ingress protection: IP66 / IP67 / IP69K Ambient temperature: -40 °C to +60 °C # Mechanical Dimensions: 62 × 69 × 290 mm Materials: aluminium (housing and covers), tempered glass (lens), SPC steel (bracket)
Marking: Ex nR II T6 Supply: 24 VDC Protection: IP66 / IP67 / IP69K
kcs
nepsi
ccc
No products in this category.
FAQ

Frequently asked questions