Services
Tools
Products
>
Enclosures, junction boxes and control stations
>
Ex p purge and pressurisation systems

Ex p purge and pressurisation systems

products available

Pepperl+Fuchs Bebco EPS purge and pressurisation systems for Ex p enclosures in hazardous areas such as Zone 2/22, and for industrial environments.

custodie
custodie-pressurizzazione-ex-p
Category
+
Switches
interruttori
interruttori-sezionatori
CEAG and Pepperl+Fuchs Ex safety switches and isolators, including GRP and stainless steel versions, for Zones 1, 2, 21 and 22, plus non-Ex industrial versions.
Plastic cable glands
cablaggio
cablaggio-pressacavi-plastica
CEAG and Pepperl+Fuchs polyamide cable glands, including blue versions for Ex i circuits, with stopping plugs and reducers for Ex e equipment.
Plugs and sockets
connessione
connessione-prese-spine
CEAG plugs and sockets: Ex service sockets and portable socket boards for Zone 1/21 from 16 to 80 A, plus 16 and 32 A industrial sockets for safe areas.
Ex e junction and terminal boxes
custodie
custodie-morsettiere-ex-e
Ex e and Ex i terminal and junction boxes and empty Ex e enclosures in GRP, polyamide and stainless steel.
PCs and remote monitors
display-e-hmi
display-pc-remote-monitor
Pepperl+Fuchs VisuNet PCs, remote monitors and thin clients for hazardous areas, with mounting accessories, power supplies, software licences and spares.
Linear luminaires
illuminazione
illuminazione-lineari
Flameproof linear LED luminaires, including the Qlight QLEX series certified to ATEX/IECEx and NEC, for lighting plants in hazardous areas.
Main switches
interruttori
interruttori-generali
CEAG Ex main and power switches up to 630 A, including changeover, reversing and star-delta versions, for electrical installations in hazardous areas.
Road tankers
messa-a-terra
messa-a-terra-autocisterne
Newson Gale Earth-Rite RTR grounding clamp for road tankers
WiFi access points
networking
networking-access-point-wifi
WiFi access points in Ex d flameproof enclosures for Zone 1/21 and Class I Div. 1, for wireless networks in hazardous areas, including mesh setups.
GRP panels
quadri-elettrici
quadri-grp
GRP (glass-reinforced polyester) panels certified to ATEX and IECEx for power distribution in hazardous areas, including custom-built versions.
Portable detectors
rilevatori-di-gas
rilevatori-portatili
Portable gas detectors for the personal protection of operators and on-site checks in industrial plants and hazardous areas.
Beacons
segnalazione
segnalazione-lampeggianti
Explosion-proof LED beacon
Explosion-proof beacons for visual signalling in hazardous areas, including Qlight multifunction LED models with steady, flashing and strobe light.
Inductive sensors
sensori
sensori-induttivi
Pepperl+Fuchs inductive sensors for non-contact detection of metal objects in automation and, in NAMUR ATEX/IECEx versions, in hazardous areas.
Isolated barriers
sicurezza-intrinseca
sicurezza-barriere-isolate
Pepperl+Fuchs H-System HiC isolated barriers and termination boards for interfacing Ex ia intrinsically safe circuits with control systems.
Fixed cameras
sorveglianza
sorveglianza-telecamere-fisse
Certified fixed cameras for hazardous areas, for continuous video surveillance of industrial plants and sites with potentially explosive atmospheres.
Pressure
strumenti-di-misura
strumenti-pressione
WIKA pressure measurement instrumentation with electrical and mounting accessories, including ATEX and IECEx certified models for hazardous areas.
iPhone
telecomunicazione
telecomunicazione-iphone
iPhones in xShielder explosion-proof covers for Zone 1/21, ATEX certified and, in the cemented-lid version, IECEx certified, for use in hazardous areas.
Drum heaters
riscaldamento
riscaldamento-riscaldatori-fusti
Induction heaters and base plates for drums up to 210 litres, for safe areas and ATEX/IECEx.
Screwdrivers and pliers
utensili
utensili-giraviti-pinze
Non-sparking screwdrivers and pliers
Non-sparking screwdrivers, tweezers, combination and half-round nose pliers, circlip pliers, side cutters, adjustable and blaster's pliers.
Cable trays
supporti-passerelle
supporti-passerelle-portacavi
Ladder, wire mesh (Flextray) and aluminium (KwikRail) cable trays and data centre runways.
Limit switch boxes
automazione-valvole
automazione-valvole-box-finecorsa
Limit switch box with position indicator
Limit switch boxes with micro switches, inductive sensors or position transmitter to signal valve position: polyamide, aluminium and stainless steel, also Ex ia, Ex d and Ex t.
Cable glands for unarmoured cable
cablaggio
cablaggio-pressacavi-cavo-non-armato
Pepperl+Fuchs metal cable glands for unarmoured and screened cables, in nickel-plated brass or stainless steel, for Ex d, Ex e and Ex t enclosures.
Portable power distribution
connessione
connessione-alimentazione-portatile
CEAG and Atexor Ex power cables, extension leads and cable reels with pre-wired plugs and sockets, for portable power supply in hazardous areas.
Ex d flameproof enclosures
custodie
custodie-antideflagranti-ex-d
Ex d flameproof enclosures and junction boxes in aluminium and stainless steel, empty or equipped.
Offshore PCs
display-e-hmi
display-pc-offshore
Ex PCs, keyboards and peripherals for Zone 1 and Zone 2, including intrinsically safe versions, for HMI workstations offshore and in hazardous areas.
High bay
illuminazione
illuminazione-high-bay
CEAG and Dialight LED high bay and pendant luminaires for Zone 1/21, Zone 2 and heavy industry, for warehouses and high-ceiling areas.
Modular switches
interruttori
interruttori-modulari
CEAG Ex 16 A changeover switches in GRP or aluminium, with or without a measuring instrument, for switching electrical circuits in Zone 1/21.
FIBC
messa-a-terra
messa-a-terra-fibc
4G routers and WiFi access points
networking
networking-router-4g
4G/LTE and 5G industrial routers with WiFi hotspot in Ex d enclosures for Zone 1/21 and Class I Div. 1, with VPN and remote management.
Metal panels
quadri-elettrici
quadri-metallici
Metal electrical panels certified to ATEX and IECEx for power distribution in hazardous areas, including custom configurations.
Fixed detectors
rilevatori-di-gas
rilevatori-fissi
Fixed gas detectors for continuous monitoring of gas presence in industrial plants and hazardous areas with potentially explosive atmospheres.
Sounders
segnalazione
segnalazione-sirene
Ex db explosion-proof electronic sounders, including Qlight horns with preset tones and voice messages, for audible signalling in hazardous areas.
Capacitive sensors
sensori
sensori-capacitivi
Pepperl+Fuchs cylindrical and rectangular capacitive sensors for detecting liquids, granules and non-metallic materials in industrial automation.
Zener barriers
sicurezza-intrinseca
sicurezza-barriere-zener
Pepperl+Fuchs 1, 2 or 3-channel DIN-rail Zener barriers for limiting energy in [Ex ia] intrinsically safe circuits connected to Zones 0 and 20.
Thermal cameras
sorveglianza
sorveglianza-telecamere-termiche
Certified thermal cameras for hazardous areas, for thermal monitoring and video surveillance of industrial plants and sites at risk of explosion.
Temperature
strumenti-di-misura
strumenti-temperatura
WIKA temperature measurement instrumentation, from precision thermometers and resistance bridges to accessories, with ATEX and IECEx certified models.
Smartphones
telecomunicazione
telecomunicazione-smartphone
ecom Smart-Ex intrinsically safe 5G Android smartphones for Zone 1/21, Zone 2/22 and Division 1 and 2, for communicating and working in hazardous areas.
Heating jackets
riscaldamento
riscaldamento-camicie-riscaldanti
Flexible heating jackets for drums, IBCs, gas cylinders and surfaces, for safe areas and ATEX/IECEx.
Hammers, sledgehammers and chisels
utensili
utensili-martelli-scalpelli
Non-sparking hammers, sledgehammers and chisels
Non-sparking hammers, club hammers, sledgehammers, hatchets, nail pullers, chisels, wedges, awls, punches and pin punches.
Channels, brackets and fixings
supporti-passerelle
supporti-profilati-staffaggi
Strut channels, pipe trapezes, suspension systems, anchors, fixings and cable hooks.
Solenoid valves
automazione-valvole
automazione-valvole-elettrovalvole
Solenoid valve with NAMUR interface
Monostable and bistable pilot solenoid valves with NAMUR interface or in-line ports for pneumatic actuators, in aluminium or stainless steel, also Ex ia, Ex ec and Ex db.
Cable glands for armoured cable
cablaggio
cablaggio-pressacavi-cavo-armato
Pepperl+Fuchs metal and barrier cable glands for armoured cables, in nickel-plated brass or stainless steel, for Ex d, Ex e and Ex t enclosures.
Signal and power connectors
connessione
connessione-segnale-potenza
CEAG eXLink Ex connectors for signal and power, and pre-wired terminal boxes fitted with eXLink, for connection under load in Zone 1/21.
Operator panels
display-e-hmi
display-pannelli-operatore
Operator panels
BEKA and Pepperl+Fuchs panel-mount operator panels, intrinsically safe or for Zone 2/22, for process control and monitoring in hazardous areas.
Bulkheads
illuminazione
illuminazione-bulkhead
CEAG and Dialight LED bulkhead and wall luminaires for Zone 1/21 and 2/22 hazardous areas and for non-classified industrial sites, including North America.
Motor starter switches
interruttori
interruttori-avviamento-motori
CEAG and Pepperl+Fuchs manual and direct-on-line Ex motor starters, with Ex d isolators in enclosures, for motor control in Zones 1, 2, 21 and 22.
Drums, IBCs and metal objects
messa-a-terra
messa-a-terra-fusti-ibc
Serial to Bluetooth adaptors
networking
networking-adattatore-seriale-bluetooth
RS232 and RS485/422 serial-to-Bluetooth adapters in Ex d enclosures for Zone 1/21, giving access to serial ports without opening the enclosure.
Components and elements
quadri-elettrici
quadri-componenti-elementi
Internal components for Ex d panels and enclosures, plus Pepperl+Fuchs PS1000 DIN-rail power supplies, including Zone 2 versions, for hazardous-area panels.
Portable gas leak detection
rilevatori-di-gas
rilevatori-fughe-gas-portatile
Portable instruments for detecting and locating gas leaks during inspection and maintenance work in industrial plants and hazardous areas.
Speakers
segnalazione
segnalazione-speaker
MEDC loudspeakers in Ex de versions, including ceiling-mounted models, for broadcasting messages and audible signals in industrial plants and hazardous areas.
Magnetic sensors
sensori
sensori-magnetici
Pepperl+Fuchs magnetic field sensors that detect magnets through non-magnetic walls, with NAMUR ATEX/IECEx versions for hazardous areas.
Remote I/O
sicurezza-intrinseca
sicurezza-remote-io
Pepperl+Fuchs LB and FB Remote I/O systems for Zone 2 or Zone 1, with I/O modules, field units and fieldbus communication to the control system.
PTZ cameras
sorveglianza
sorveglianza-ptz
Certified PTZ cameras for hazardous areas, with pan, tilt and zoom, for video surveillance of industrial plants and sites at risk of explosion.
Push-button and local control stations
custodie
custodie-pulsantiere-stazioni-comando
Ex e and Ex d local control stations in GRP, polyamide, aluminium and stainless steel.
Level
strumenti-di-misura
strumenti-livello
WIKA level measurement instruments: magnetic indicators, transmitters, switches, external chambers and accessories, including ATEX and IECEx certified versions.
Tablets
telecomunicazione
telecomunicazione-tablet
Pepperl+Fuchs and ecom instruments tablets and terminals, including tablets for Zone 2/22 and Division 2 and industrial kiosk terminals for safe areas.
Temperature control
riscaldamento
riscaldamento-controllo-temperatura
Controllers and power regulators for drum and container heaters, including ATEX versions.
Spanners and wrenches
utensili
utensili-chiavi
Non-sparking spanners and wrenches
Non-sparking open-end, combination, ring, slogging and adjustable spanners, sockets and accessories, hexagon keys, hook spanners, pipe wrenches and valve wheel wrenches.
Pipe supports and seismic bracing
supporti-passerelle
supporti-tubazioni-antisismica
Pipe hangers and clamps, seismic bracing, TOLCO fire-protection supports and anti-vibration supports.
Pneumatic accessories
automazione-valvole
automazione-valvole-accessori-pneumatici
Sintered brass and polycarbonate silencers
NAMUR throttle plates, quick exhaust blocks, silencers, flow regulators and check valves to complete the pneumatic circuit of actuators.
North American cable glands
cablaggio
cablaggio-pressacavi-nord-americani
Eaton cable glands for installations built to North American standards, for connecting cables to enclosures and equipment in hazardous areas.
Multi-pin connectors
connessione
connessione-multipin
Eaton multipin connectors for connecting cables and electrical equipment in potentially explosive atmospheres and in industrial settings.
Displays and indicators
display-e-hmi
display-indicatori
Displays and indicators for showing process values and signals in the field, for installation in hazardous areas and in industrial settings.
Floodlights
illuminazione
illuminazione-floodlight
Qlight and CEAG LED floodlights and work lights for Zone 2/22 and industrial use, for lighting outdoor areas, plants and machinery.
Lighting switches
interruttori
interruttori-luce
CEAG Ex 16 A light switches, changeover switches, push-buttons and photocell switches for controlling lighting in Zone 1/21.
Panel-mount and OEM
messa-a-terra
messa-a-terra-interno-quadro-oem
Intrinsic safety barriers for antennas
networking
networking-barriere-si-antenne
Intrinsically safe RF barriers, including multi-channel versions and units built into Ex d boxes, for connecting antennas in classified areas.
Ex d panels and enclosures
quadri-elettrici
quadri-custodie-ex-d
Ex d flameproof panels and enclosures certified to ATEX and IECEx, including custom configurations, for electrical installations in hazardous areas.
Fixed gas leak detection
rilevatori-di-gas
rilevatori-fughe-gas-fisso
Fixed gas leak detection systems for the continuous surveillance of industrial plants and hazardous areas at risk of explosive atmospheres.
Combined units
segnalazione
segnalazione-unita-combinate
Explosion-proof combined LED beacon and sounder
Qlight explosion-proof combined units pairing a multifunction LED beacon with an electronic horn for visual and audible signalling in hazardous areas.
Ultrasonic sensors
sensori
sensori-ultrasuoni
Pepperl+Fuchs ultrasonic sensors for object detection, double-sheet, label and splice detection, and safety applications in industrial automation.
Fieldbus
sicurezza-intrinseca
sicurezza-fieldbus
Pepperl+Fuchs FieldConnex junction boxes for FOUNDATION Fieldbus H1 and PROFIBUS PA, with Segment Protectors and I/O modules, for Zone 1 and Zone 2.
Combined PTZ cameras
sorveglianza
sorveglianza-ptz-combinate
Certified combined PTZ cameras for hazardous areas: pan-tilt units with zoom for video surveillance of industrial plants and sites at risk of explosion.
Panel-mount operators
custodie
custodie-operatori-pannello
Push-buttons, selector switches, indicator lights and components for building Ex control stations and panels.
Force
strumenti-di-misura
strumenti-forza
Load cells and force transducers in Ex versions for force measurement and weighing in industrial plants and hazardous areas.
Fixed telephones
telecomunicazione
telecomunicazione-telefoni-fissi
Fixed telephones for industrial plants, ships and offshore sites, including IMCOS automatic and sound-powered telephones, also in ATEX versions for Zone 1.
Insulation and covers
riscaldamento
riscaldamento-isolamento-coperture
Insulating jackets, insulated lids and rain covers for drums, IBCs and gas cylinders.
Cutting and scraping tools
utensili
utensili-taglio-raschiatura
Non-sparking cutting and scraping tools
Non-sparking scissors, tin snips, bolt cutters, pipe cutters, knives, files, hacksaw frames, scrapers and putty knives.
Rooftop supports and gratings
supporti-passerelle
supporti-tetto-grigliati
Non-penetrating Dura-Blok bases for flat roofs and anti-slip gratings for walkways and stairs.
Mounting kits
automazione-valvole
automazione-valvole-kit-montaggio
Mounting kit for manually operated valves
Kits for fitting limit switch boxes and sensors to manual valves and linear actuators, or in an open configuration with cylindrical sensors or mechanical switches.
Adaptors
cablaggio
cablaggio-adattatori
Pepperl+Fuchs and Eaton metric/NPT thread adaptors, reducers and enlargers for cable glands and Ex d and Ex e enclosure entries in hazardous areas.
Zone 2/22 connectors
connessione
connessione-zona-2-22
Connectors for use in Zone 2 and Zone 22, for signal and power connections in potentially explosive gas and dust atmospheres.
Street lights
illuminazione
illuminazione-stradali
Dialight LED area and street lights for yards and walkways, in versions for non-classified industrial sites and for Class I Div 2 areas (UL/CSA).
Ethernet intrinsic safety barriers
networking
networking-barriere-si-ethernet
Ex d/Ex ia Ethernet barriers for mounting on enclosures in classified areas or in the safe area, with hot-pluggable M12 connectors.
EJB panels and enclosures
quadri-elettrici
quadri-custodie-ejb
Eaton CEAG EJB Ex d IIB flameproof aluminium enclosures, supplied empty, with windows, handles and push-buttons for building panels for Zones 1, 2, 21 and 22.
Valve leak detection
rilevatori-di-gas
rilevatori-fughe-valvole
Valve leak detection solutions for identifying gas leaks on process valves in industrial plants and hazardous areas.
Intrinsic safety
segnalazione
segnalazione-sicurezza-intrinseca
MEDC intrinsically safe Ex ia visual and audible signals, such as beacons and sounders powered via a barrier, for use in Zones 0, 1 and 2.
Encoders
sensori
sensori-encoder
Pepperl+Fuchs incremental, absolute and draw-wire encoders for position and distance measurement, with ATEX/IECEx-certified versions for hazardous areas.
Thermal PTZ cameras
sorveglianza
sorveglianza-ptz-termiche
Certified thermal PTZ cameras for hazardous areas, combining pan-tilt movement and thermal imaging for surveillance of plants and sites at risk of explosion.
Custom and 72h Express
custodie
custom-express-72h
Junction boxes and control stations assembled by Maffioletti to customer specification, also with our 72-hour Express service.
Flow
strumenti-di-misura
strumenti-portata
WIKA flow measurement instruments, including ultrasonic gas flow meters and air flow sensors for ventilation and air-conditioning systems.
Miscellaneous tools
utensili
utensili-vari
Non-sparking miscellaneous tools
Non-sparking brushes, funnels, pry bars, picks, shovels, spades and tool sets in carrying case.
Readers and Scanners
telecomunicazione
telecomunicazione-lettori-scanner
1D/2D barcode readers, wireless and corded, and RFID readers for hazardous areas and industrial environments.
Testers and verification instruments
messa-a-terra
messa-a-terra-tester-verifica
Newson Gale Sole-Mate II footwear test station
Testers for antistatic footwear and clamps for checking the electrical continuity of flexible hoses before product transfer.
Keyboards and Peripherals
display-e-hmi
display-tastiere-periferiche
Industrial keyboards with integrated mouse and peripherals for operator stations in hazardous areas and industrial environments.
Surge protection
sicurezza-intrinseca
sicurezza-protezione-sovratensioni
Pepperl+Fuchs surge protection for instrumentation loops and fieldbus networks, mounted in the field on the instrument, on DIN rail or on K-System modules.
Ex p purge and pressurisation systems
custodie
custodie-pressurizzazione-ex-p
Pepperl+Fuchs Bebco EPS purge and pressurisation systems for Ex p enclosures in hazardous areas such as Zone 2/22, and for industrial environments.
ISO brackets, couplings and reducers
automazione-valvole
automazione-valvole-giunti-adattatori
ISO 5211 steel mounting brackets
ISO 5211 mounting brackets, blank couplings with external square and square reducers to connect the pneumatic actuator to any valve.
Stopping plugs and accessories
cablaggio
cablaggio-tappi-accessori
Pepperl+Fuchs stopping plugs, locknuts, washers, shrouds and breathers for cable glands and cable entries on Ex d, Ex e and Ex t enclosures.
Portable lights
illuminazione
illuminazione-portatili
CEAG portable Ex lamps: hand lamps, machine lights, temporary lighting and tank inspection lamps, for use in Zone 1/21 and 2/22 hazardous areas.
Antennas
networking
networking-antenne
Antennas, antenna feedthroughs and coaxial extension cables for connecting radios and RF barriers to remote antennas, in hazardous and industrial areas.
Signal towers
segnalazione
segnalazione-torrette
Qlight modular LED signal towers with buzzer, in versions for Zone 2 and Class I Div 2, for status signalling on machines and plants.
Portable instruments
strumenti-di-misura
strumenti-portatili
ecom instruments intrinsically safe Ex ia tools and devices for Zone 1, such as magnetic field probes and wall clocks, for use in hazardous areas.
Photoelectric Sensors
sensori
sensori-fotoelettrici
Thru-beam, retroreflective and diffuse mode sensors, light grids, slot sensors, contrast, colour and fibre optic sensors.
Cameras
telecomunicazione
telecomunicazione-fotocamere
Intrinsically safe cameras for documenting inspections and maintenance in classified areas.
Ethernet-APL
sicurezza-intrinseca
sicurezza-ethernet-apl
Pepperl+Fuchs Ethernet-APL field switches for installation in Zone 2, with Ex ic or Ex ia spur ports for connecting field instruments to the Ethernet network.
PA/GA and sound systems
telecomunicazione
telecomunicazione-pa-ga
IMCOS PA/GA systems for public address and general alarm on board: SOLAS audio-visual columns and panels, microphones, volume controls and controllers.
VDI/VDE 3845 brackets and accessories
automazione-valvole
automazione-valvole-staffe-vdi-vde
Adjustable VDI/VDE 3845 stainless steel brackets
Adjustable and one-piece VDI/VDE 3845 brackets for limit switch boxes and positioners, solenoid valve plates, shaft feedthroughs, extensions and visual position indicators.
Sensor and actuator cordsets
connessione
connessione-cavi-sensori-attuatori
Pre-wired M8 and M12 cordsets for sensors and actuators, single-ended or double-ended, in PUR, PVC and welding-resistant jackets, including blue NAMUR ATEX/IECEx versions.
Intrinsic safety cables
cablaggio
cablaggio-cavi-sicurezza-intrinseca
Cables for intrinsically safe (Ex i) circuits, used to connect instrumentation and equipment installed in hazardous areas.
Tower obstruction lights
illuminazione
illuminazione-segnalazione-torri
Qlight and FHF LED aircraft obstruction lights, including flameproof versions, for towers, stacks and tall structures at plants with hazardous areas.
Humidity and temperature transmitters
strumenti-di-misura
strumenti-umidita-temperatura
Humidity and temperature transmitters in Ex versions for monitoring relative humidity and temperature in industrial plants and hazardous areas.
Distance and LiDAR Sensors
sensori
sensori-distanza-lidar
Optical distance sensors and 2-D and 3-D LiDAR scanners for measurement, positioning and collision avoidance.
Audio and push-to-talk
telecomunicazione
telecomunicazione-audio-ptt
Speaker microphones, headsets and push-to-talk solutions certified for hazardous areas.
Radio modems and telemetry
networking
networking-radiomodem-telemetria
Intrinsically safe LoRaWAN I/O nodes, radio modems and Ex d power supplies for wireless telemetry of field signals in hazardous areas.
Signal conditioners
sicurezza-intrinseca
sicurezza-condizionatori-segnale
Pepperl+Fuchs SC-System and K-System signal conditioners for non-Ex i circuits: isolators, switch amplifiers, converters and solenoid valve drivers.
Manual call points
segnalazione
segnalazione-pulsanti-allarme
MEDC lever and push-button manual alarm call points in Ex d and Ex ia versions, for manually triggering alarms in hazardous areas.
Telephone accessories
telecomunicazione
telecomunicazione-accessori-telefonici
FHF accessories and spare parts for telephones and signals: handsets for Ex and weatherproof telephones, domes, protective grilles, brackets and arresters.
Field-attachable connectors
connessione
connessione-connettori-da-campo
M8, M12, 7/8", 1/2", M23 and RJ45 connectors for field assembly, male or female, straight or angled, with screw, IDC or solder termination.
Armoured cables
cablaggio
cablaggio-cavi-armati
Armoured cables for wiring electrical installations in hazardous areas and industrial settings, where the cabling needs mechanical protection.
Recessed luminaires
illuminazione
illuminazione-incasso
CEAG and Raytec recessed LED ceiling luminaires for Zone 1/21 and 2/22 and for non-classified industrial areas, also with emergency versions.
RFID and Code Identification
sensori
sensori-identificazione
LF, HF and UHF RFID systems, control interfaces, tags, stationary and handheld barcode and 2-D code readers.
HART interfaces
sicurezza-intrinseca
sicurezza-interfacce-hart
Pepperl+Fuchs HART interfaces, including USB, RS-232 and Bluetooth modems and multiplexers, for commissioning, diagnostics and asset management.
Status lights
segnalazione
segnalazione-lampade-di-stato
MEDC multi-way status lamps in Ex e and Ex d versions, with LED, xenon or filament sources, for visual signalling in Zones 1, 2, 21 and 22.
Valve connectors
connessione
connessione-connettori-elettrovalvole
DIN EN 175301-803 form A, B and C valve connectors, pre-wired or field-attachable, with Z-diode, varistor, LED or IO-Link.
Screened cables
cablaggio
cablaggio-cavi-schermati
Screened cables for wiring power and signal circuits in hazardous areas and industrial settings, where protection against interference is needed.
Emergency lighting
illuminazione
illuminazione-emergenza
Qlight and CEAG LED emergency, safety and exit sign luminaires, flameproof and with built-in battery, for Zone 1/21 hazardous areas.
Vision Sensors
sensori
sensori-visione
Vision sensors, industrial cameras and light section sensors for inspection, quality control and measurement.
Terminals and system accessories
sicurezza-intrinseca
sicurezza-morsetti-accessori
Pepperl+Fuchs MFT Ex d e multifunction terminals for Zone 1 and K-System accessories, such as Power Rail, power supply modules and terminal blocks for DIN rail.
Heat detectors
segnalazione
segnalazione-rilevatori-calore
MEDC HD1 heat detectors in Ex d, Ex e and Ex ia versions, with alarm thresholds from 60 to 385 °C, for fire detection in hazardous areas.
Passive splitters
connessione
connessione-ripartitori-passivi
M8 and M12 passive splitters with 4, 6 and 8 slots and AS-Interface junction modules for flat cable, in fully encapsulated housings.
Conduits and fittings
cablaggio
cablaggio-guaine-raccordi
Metal, polyamide and PVC flexible conduits with matching fittings for cable protection.
Positioning Systems
sensori
sensori-posizionamento
Inductive and optical positioning systems for overhead cranes, stacker cranes, AGVs and conveyor systems.
Y and T splitters
connessione
connessione-ripartitori-y-t
M8 and M12 Y-cables and Y or T adapters to connect two sensors or actuators to a single port and to loop through bus signals.
Inclination and Acceleration Sensors
sensori
sensori-inclinazione
Single- and dual-axis inclinometers, acceleration sensors and inertial measurement units for mobile machinery and plants.
Panel receptacles
connessione
connessione-connettori-pannello
M8, M12, 7/8" and 1/2" male and female panel receptacles for front or rear mounting on housings and cabinets, with single wires or an inner connector.
Vibration Sensors
sensori
sensori-vibrazione
Vibration sensors for condition monitoring of motors, pumps and fans, also with IO-Link and SIL 2.
Bulk raw cable
connessione
connessione-cavo-grezzo
Bulk raw cable on reels for sensors and actuators, spiral cables and AS-Interface flat cable, to be combined with field-attachable connectors.
Filter
+
Product Certification

Ex p purge and pressurisation systems

Back
Bebco EPS 1000 series Pepperl+Fuchs
Bebco EPS Type Y / Type Z – 1000 series purge systems to NFPA 496 for Div. 1 and Div. 2
Bebco EPS 1000 series pneumatic purge and pressurisation systems for Type 4/12 enclosures in Class I and II: Type Y from Division 1 to Division 2, Type Z from Division 2 to non-hazardous, NFPA 496, volumes from 2 to 450 ft³.
custodie-pressurizzazione-ex-p
custodie
quadri-elettrici
pepperl-fuchs-bebco-eps-serie-1000-purge-type-y-z
# General Product type: Pneumatic Type Y/Z purge and pressurisation system Brand: Pepperl+Fuchs Series: Bebco EPS 1000 (1001A, 1001B, 1001C, 1002, 1003, 1004, 1005, 11, 1011, 1012) Reference standards: NEC (NFPA 70) Article 500, NFPA 496, ISA 12.4 Protective gas: instrument air or inert gas Max enclosure volume: 1001A, 11, 1011 2 ft³ (Class I) / 10 ft³ (Class II); 1001B 50 ft³; 1001C 250 ft³; 1002 and 1012 15 ft³; 1003 75 ft³; 1004 200 ft³; 1005 450 ft³ Safe pressure: 0.25" wc (Class I), 1.0" wc (Class II) Class I purging: 4 enclosure volume exchanges Leakage compensation flow: 0.1–3.5 SCFH (2.8–99 l/h) Mounting: LH, RH, TM, BM, WM, FM, PM (PM LPS only); UM, FM, PM for 1011 and 1012 Options: VX (vortex cooler indicator gauge), ECK (enclosure connection kit) # Certifications Type Y: Division 1 to Division 2 Type Z: Division 2 to non-hazardous Approvals: FM, cULus (1011 and 1012: cULus) Class I: Groups A, B, C, D (LPS, WPSA); Groups C, D (WPS) Class II: Groups E, F, G (1001A, 1001B, 1001C); Groups F, G (11, 1011) # Electrical WPS pressure switch contacts: 120 V AC, 15 A WPSA pressure switch contacts: 120/220 V AC; 24 V DC, 10 A; 125 V DC, 50 mA WPSA supply: 120 V AC standard; 24 V DC, 220 V AC, 240 V AC on request Pressure switch conduit entry: 1/2" FPT # Mechanical Supply pressure: 5–120 psi with EPV vent (1001A, 1001B, 1001C, 11, 1011); 80–120 psi (1002–1005, 1012) Rapid Exchange purge flow: 4 SCFM (1002, 1012), 10 SCFM (1003), 30 SCFM (1004), 60 SCFM (1005) Ambient temperature: -29 to 49 °C (model 11: 4.4 to 49 °C) Mounting plate: 316 stainless steel, 14 ga Tube fittings: 316 stainless steel forged body Mass: from 2.3 kg (1001A-LPS, 11-LPS) to 11.3 kg (1005-WPS)
Protection: Type Y / Type Z Standard: NFPA 496 Area: Class I and II, Div. 1 and 2 Enclosure volume: 2–450 ft³ Approvals: FM, cULus
ul
Bebco EPS 3000 series Pepperl+Fuchs
Bebco EPS Type Y / Type Z – 3000 series Rapid Exchange purge systems (3003, 3004)
Bebco EPS 3003 and 3004 Rapid Exchange® purge and pressurisation systems for enclosures in Class I, Division 1 and 2: Type Y and Type Z to NFPA 496, compact pneumatic manifold, vertical, horizontal or panel mounting.
custodie-pressurizzazione-ex-p
custodie
quadri-elettrici
pepperl-fuchs-bebco-eps-serie-3000-purge-type-y-z
# General Product type: Type Y/Z Rapid Exchange purge and pressurisation system Brand: Pepperl+Fuchs Series: Bebco EPS 3000 (3003, 3004) Reference standards: NEC (NFPA 70), NFPA 496, ISA 12.4 Protective gas: instrument air or inert gas Max enclosure volume: 3003 90 ft³ (2.54 m³); 3004 250 ft³ Required vent: EPV-3 (3003), EPV-4 (3004) Safe pressure: 0.25" wc (6.35 mm) Leakage compensation flow: 0.1–3.5 SCFH (2.8–99 l/h) 3003 exchange time: 1 min per 3.0 ft³ (4 exchanges), 1 min per 2.4 ft³ (5 exchanges) Mounting: VML, VMR, HMT, HMB, VPM, HPM, WM, CK (CK LPS only) # Certifications Type Y: Class I, Division 1 to Division 2 Type Z: Class I, Division 2 to non-hazardous Approvals: FM, cULus Groups: A, B, C, D (LPS, WPSA); C, D (WPS) # Electrical WPS pressure switch contacts: 120 V AC, 15 A WPSA pressure switch contacts: 120/220 V AC; 24 V DC, 10 A; 125 V DC, 50 mA WPSA supply: 120 V AC standard; 24 V DC, 220 V AC, 240 V AC on request Pressure switch conduit entry: 1/2" FPT # Mechanical Supply pressure: 80–120 psi (5.5–8.3 bar) 3003 purge flow: 12 SCFM / 720 SCFH (regulator set to min. 60 psi) 3003 ports: system supply 1/4" FPT, enclosure supply 1/2" FPT, reference 1/4" tube Ambient temperature: -29 to 49 °C Materials: anodised aluminium manifold, 316 stainless steel valves and fittings, 316 stainless steel face plate 3003 mass: 4.5 kg (LPS), 6.8 kg (WPS)
Protection: Type Y / Type Z Standard: NFPA 496 Area: Class I, Div. 1 and 2 Enclosure volume: up to 250 ft³ Approvals: FM, cULus
ul
Bebco EPS Type X / Ex pxb Pepperl+Fuchs
Bebco EPS Type X / Ex pxb – 6000 series purge systems for Div. 1 and Zone 1
Bebco EPS 6000 series Type X / Ex pxb automatic purge and pressurisation systems for enclosures in Class I or II Div. 1 and Zone 1/21, with 316L stainless steel unit, LCD user interface, EPV-6000 digital vent and ATEX, IECEx, cULus, CCC approvals.
custodie-pressurizzazione-ex-p
custodie
quadri-elettrici
pepperl-fuchs-bebco-eps-6000-type-x-ex-pxb
# General Product type: Type X / Ex pxb automatic purge and pressurisation system Brand: Pepperl+Fuchs Series: Bebco EPS 6000 Type of protection: Type X, Ex pxb Area: Class I or II, Div. 1 → non-hazardous; Zone 1/21 → non-hazardous Atmosphere: gas and dust Max enclosure volume: 12.7 m³ (450 ft³) Components: control unit (WH, CK), EPCU, UIC, DV manifold, IS board, temperature hub and sensors Vent: EPV-6000 digital, anodised 6063T aluminium (AA) or 316L stainless steel (SS) # Certifications Approvals: DEMKO, UL, cULus, IECEx, CCC ATEX: UL/Demko 07 ATEX 0705753X IECEx: IECEx UL 08.0003X Marking: II 2 G Ex db ib [ib Gb] [pxb Gb] IIC T4 Gb # Electrical Rated voltage: 90–264 V AC, 48–62 Hz; 20–30 V DC Versions: standard or high current Enclosure contacts: up to 12 A per contact Interface: backlit 2-line × 20-character LCD, status LEDs # Mechanical Dimensions: 183 × 367.5 × 152.5 mm Mass: 11.4 kg Material: 316L stainless steel Degree of protection: Type 4X, IP66 Operating temperature: -20 to +60 °C
Protection: Type X / Ex pxb Area: Div. 1, Zone 1/21 Atmosphere: gas and dust Voltage: 90–264 V AC / 20–30 V DC Housing: 316L stainless, IP66
atex
iecex
ul
ccc
ce
Bebco EPS Ex pxb / Ex pyb Pepperl+Fuchs
Bebco EPS Ex pxb / Ex pyb – 6500 and 6100 series purge systems for Zone 1/21
Bebco EPS 6500 series Ex pxb / Ex pyb automatic purge and pressurisation systems for Zone 1/21, ATEX, IECEx, CCC and SIL 2 certified, with intrinsically safe touch interface, HART/RS-485 and Bluetooth; EPV-6100 vents for the 6100 series included.
custodie-pressurizzazione-ex-p
custodie
quadri-elettrici
pepperl-fuchs-bebco-eps-6500-6100-ex-pxb-ex-pyb
# General Product type: Ex pxb / Ex pyb automatic purge and pressurisation system Brand: Pepperl+Fuchs Series: Bebco EPS 6500; EPV-6100 vents for 6100 series Type of protection: Ex pxb, Ex pyb Area: Zone 1/21 Atmosphere: gas and dust Max enclosure volume: 12.75 m³ Components: control unit, EPCU, UIC, DV/PV manifold, manifold block Mounting: external (EXT), panel (PM01, PM02) Vent: EPV-6500, aluminium (AA) or stainless steel cap (SS) Protective gas: industrial-grade air or inert gas # Certifications Approvals: ATEX, IECEx, CCC ATEX: DEMKO 16 ATEX 1640X IECEx: IECEx UL 16.0003X Functional safety: SIL 2 (exida) Valves: ATEX/IECEx digital, ATEX proportional # Electrical Rated voltage: 100–240 V AC, 48–62 Hz; 20–30 V DC Communication: RS-485/HART, Bluetooth Interface: intrinsically safe LCD touch pad # Mechanical Dimensions: 150 × 150 × 145 mm Mass: approx. 5 kg Materials: 316L stainless steel housing and hardware, UIC display cover in Makrolon FI Degree of protection: IP66 Operating temperature: -20 to +70 °C
Protection: Ex pxb / Ex pyb Zones: 1 and 21 Functional safety: SIL 2 Communication: HART, Bluetooth Temperature: -20 to +70 °C
atex
iecex
ccc
sil
ce
Bebco EPS Type Z / Ex pzc Pepperl+Fuchs
Bebco EPS Type Z / Ex pzc – 7500 and 5500 series purge systems for Div. 2 and Zone 2/22
Bebco EPS 7500 and 5500 series Type Z / Ex pzc purge and pressurisation systems for enclosures in Class I or II Div. 2 and Zone 2/22, with automatic or manual operation, leakage compensation, alarm contact and ATEX, IECEx and cULus approvals.
custodie-pressurizzazione-ex-p
custodie
quadri-elettrici
pepperl-fuchs-bebco-eps-7500-5500-type-z-ex-pzc
# General Product type: Type Z / Ex pzc purge and pressurisation system Brand: Pepperl+Fuchs Series: Bebco EPS 7500, 5500 Type of protection: Type Z, Ex pzc Area: Class I or II, Div. 2 and Zone 2/22 → non-hazardous Atmosphere: gas and dust Max enclosure volume: 12.7 m³ (450 ft³) (7500) Protective gas: compressed air or inert gas, 40 µm filter, oil-free (7500) Supply pressure: 1.4–8.2 bar (20–120 psig) (7500) 7500 enclosure pressure: 0–12.9 mbar (0–5" wc) Vents: EPV-7500, EPV-5500 in aluminium (AA) or with stainless steel cap (SS) 5500 cable entries: PSC/PBC 3 x M20 glands, PSH 3 x 1/2" NPTF entries, LSC/LBC 3 x M12 glands, PNO/LNO no glands # Certifications 7500: UL, cULus, IECEx, ATEX, CCC; DEMKO 18 ATEX 2025X 7500 marking: II 3 G Ex ec mc nC [pzc Gc] IIC T6…T4 Gc; II 3 D Ex mc tc [pzc Dc] IIIC T60 °C…T80 °C Dc 7500 cULus: Class I Div. 2 Groups A, B, C, D; Class II Div. 2 Groups F, G 5500: DEMKO 14 ATEX 1282X, IECEx UL 14.0019X, cULus 5500 marking: II 3 (3) G Ex ic ec nC [ic Gc] [pzc Gc] IIC T4 Gc # Electrical 7500 supply: 90–250 V AC, 50–60 Hz; 20–30 V DC 7500 outputs: K1 enclosure and K2 alarm contacts 5 A at 250 V AC / 30 V DC; SV1 solenoid 0.5 A 5500 supply: 100–240 V AC or 20–30 V DC Manifolds: 5500 at 24 V DC, 120 V AC, 230 V AC; 7500-MAN-BK at 115 V AC (T4), 230 V AC (T6), 24 V DC (T4); 7500-MAN-MV-01 manual # Mechanical 7500 housing: A380, A356 or 6061-T6 aluminium, Type 4X / IP66 5500 housing: 316 stainless steel, Type 4X / IP66 7500 temperature: -40 to +50 °C (T6), -40 to +65 °C (T5), -40 to +70 °C (T4) 5500 temperature: -20 to +60 °C (T4) 7500 unit mass: approx. 0.71 kg
Protection: Type Z / Ex pzc Area: Div. 2, Zone 2/22 Operation: automatic or manual Enclosure volume: up to 12.7 m³ Certifications: ATEX, IECEx, cULus
atex
iecex
ul
ccc
ce
Bebco EPS Enviro-Line 10E Pepperl+Fuchs
Bebco EPS Enviro-Line 10E – Enclosure pressurisation for non-hazardous industrial areas
Bebco EPS Enviro-Line 10E pressurisation systems for Type 4 or 12 enclosures in non-hazardous areas with dust, dirt, moisture or corrosive atmospheres: constant 0.5" wc overpressure, for enclosures up to 7.2 m³ (250 ft³).
custodie-pressurizzazione-ex-p
custodie
quadri-elettrici
pepperl-fuchs-bebco-eps-enviro-line-10e
# General Product type: Environmental pressurisation system for non-hazardous areas Brand: Pepperl+Fuchs Series: Bebco EPS Enviro-Line 10E Installation area: non-hazardous areas only (does not meet NFPA 496) Enclosures: Type 4 or Type 12, up to 7.2 m³ (250 ft³) Protective gas: instrument air or inert gas Enclosure pressure: 0.5" wc (12.5 mm wc, 1.25 mbar) Leakage compensation flow: 0.1–3.5 SCFH (2.83–99.12 l/h) Versions: LGS (no pressure switch), WGS (with GP pressure switch); WRR (redundant regulator), WVT (with EPV-3-GP vent) Mounting: UM universal, PM panel (PM not with WRR) # Electrical Connection: terminal blocks Output (WGS): pressure switch contacts Contact rating: 15 A at 120–480 V AC, 60 Hz resistive load; 1/8 HP at 125 V AC # Mechanical Supply pressure: 5–120 psi (0.34–8.3 bar) Connections: supply GBC-6 3/8", reference GBC-4 1/4"; nylon or polyethylene tubing Materials: 316L 14 ga stainless steel mounting plate; enamelled zinc regulator body; nickel-plated brass fittings Ambient temperature: -28.9 to 48.9 °C Mass: 3.18 kg (10E-LGS-WRR) to 6.35 kg (10E-WGS-WVT)
Area: non-hazardous (industrial) Enclosure pressure: 0.5" wc Enclosure volume: up to 250 ft³ Gas: instrument air or inert gas Mounting: universal or panel
industriale
No items found.
Bebco EPS EPV-1 to EPV-5 Pepperl+Fuchs
Bebco EPS EPV-1 to EPV-5 – Protection vents for Type Y/Z and Enviro-Line purge systems
Bebco EPS EPV-1 to EPV-5 protection vents for pressurised enclosures: spark arrestor (SA) pressure relief valves for the 1000 and 3000 series Type Y/Z systems and general-purpose (GP) versions, 1/2" to 2" connections, top or side mounting.
custodie-pressurizzazione-ex-p
custodie
quadri-elettrici
pepperl-fuchs-bebco-eps-sfiati-epv-purge
# General Product type: Protection vent for pressurised enclosures Brand: Pepperl+Fuchs Series: Bebco EPS EPV-1, EPV-2, EPV-3, EPV-4, EPV-5 Connection: 1/2" (EPV-1), 3/4" (EPV-2), 1-1/4" (EPV-3), 1-1/2" (EPV-4), 2" (EPV-5) Versions: SA spark arrestor, GP general purpose Mounting: top (00), side (90) Cracking pressure: 0.65" wc (16.5 mm wc) Operating pressure: 2–5" wc, max 5–7" wc Matching systems: 11, 1011, 1001A, 1002, 1012, 1003, 3003, 1004, 3004, 1005; EPV-3-GP for Enviro-Line 10E # Certifications Certification: only as a component of the relevant Type Y/Z purge system GP versions: not certified # Mechanical Materials: 3003 aluminium cap, die-cast aluminium base, 316 stainless steel valve and spark arrestor Ambient temperature: -29 to 49 °C Mass: from 1.81 kg (EPV-1/2-GP) to 5.44 kg (EPV-5-GP)
Type: spark arrestor vent Connection: 1/2" to 2" Cracking pressure: 0.65" wc Mounting: top or side Systems: 1000, 3000, 10E series
ul
Bebco EPS Pepperl+Fuchs
Bebco EPS – Accessories and spare parts for purge and pressurisation systems
Accessories and spare parts for Pepperl+Fuchs Bebco EPS purge systems: stainless steel fittings, tubing, tamper-proof regulators, remote filters, mounting kits, conduit kits, remote alarms, replacement coils and demo kits.
custodie-pressurizzazione-ex-p
custodie
quadri-elettrici
pepperl-fuchs-bebco-eps-accessori-purge
# General Product type: Accessories and spare parts for purge and pressurisation systems Brand: Pepperl+Fuchs Series: Bebco EPS Fittings: stainless steel SC (straight) and NC (90°), 1/4" to 1/2" Tubing: 316 stainless steel, 0.035" wall, 3 ft; polyethylene 1/4", 4 ft TR-10 / TR-10-G regulator: pre-regulation of the supply to 5 psi Remote filters: RCF-4 (1/4"), RCF-8 (1/2") Mounting kits: SMK-1/2/3-SS, SMK-4, SMK-6, SMK-8, SMK-10, SMK-6M, SMK-8M, PMK-1, PMK-2 Remote alarms: RAH (Div. 1 horn), RAB-1 (Div. 1 beacon), RAB-2 (Div. 2 red strobe) # Electrical Solenoid coils: 24 V DC, 110 V AC V31-WM-BK5M-PUR-ABG cordset: M8 female angled, 4-pin, A-coded, max 30 V AC/DC, 4 A # Mechanical V31-WM-BK5M-PUR-ABG cable: PUR, shielded, 4 x 0.34 mm², 5 m, IP66/IP68
Type: purge accessories and spares Fittings: stainless, 1/4" to 1/2" Tubing: 316 stainless and PE Regulator: TR-10 tamper-proof Mounting: SMK and PMK kits
No items found.
No products in this category.
FAQ

Frequently asked questions